RB header made for emissons
#1
Full Member
Thread Starter
Join Date: Apr 2002
Location: Riverside and La Jolla, CA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
RB header made for emissons
is there anyone who makes a RB header that will work with the emissions controls? if not, would it even be worth it to have it done? darn CA emissons laws are tough so i dont want to lose the ratsnest but i want all the power i can get with it on...
opinions?
advice?
thanks
joe
opinions?
advice?
thanks
joe
#2
I believe that none of them are legal.
A friend of mine has a RB header on an '84 GSL-se. With all emissons components on the engine, including high flow cat, it passed. Which was 2 months ago.
As long as you have ALL the emission components covered...then you should not have any probs. (change your plugs and oil prior...just as a pre-caution).
A friend of mine has a RB header on an '84 GSL-se. With all emissons components on the engine, including high flow cat, it passed. Which was 2 months ago.
As long as you have ALL the emission components covered...then you should not have any probs. (change your plugs and oil prior...just as a pre-caution).
#3
Driving RX7's since 1979
iTrader: (43)
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 8 Likes
on
8 Posts
Exactly.....
Be sure and get the RB Header modified by Mazdatrix for the Actuators. Thats what I did based on advise FROM my friends at RB.
You should be ok, except you might run into a problem if you get sent to a Test Only center. Those guys can get pretty **** about simple mod's.
You should be ok, except you might run into a problem if you get sent to a Test Only center. Those guys can get pretty **** about simple mod's.
Thread
Thread Starter
Forum
Replies
Last Post
jeremyferguson4444
1st Generation Specific (1979-1985)
8
09-19-15 01:27 PM