Rats nest and other stuff
#1
Full Member
Thread Starter
Join Date: Oct 2002
Location: Timbuktu
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Rats nest and other stuff
A few questions...
I have removed the rats nest from my 12A track car. Also removed the ACV, air pump, swapped to a 79 manifold and spacer. The choke is gone, as is the hot start - the carb is about as bare as it can be.
Is there any reason to keep the Emmissions computer and the wiring, or can I yank it all?
The evaporative emmissions... can I remove the canister, close the line to the block, and route the fuel tank line into the same catch can as the crackcase breather?
Thanks.
I have removed the rats nest from my 12A track car. Also removed the ACV, air pump, swapped to a 79 manifold and spacer. The choke is gone, as is the hot start - the carb is about as bare as it can be.
Is there any reason to keep the Emmissions computer and the wiring, or can I yank it all?
The evaporative emmissions... can I remove the canister, close the line to the block, and route the fuel tank line into the same catch can as the crackcase breather?
Thanks.
#3
Full Member
Thread Starter
Join Date: Oct 2002
Location: Timbuktu
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
asdf
Gotta save for a house, so I'll be instructing for NASA and autocrossing with SCCA at FedEx Field. No real plans for the car - just having fun with it. When I come back to club racing, I'll buy a car that somebody else has already developed.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM