race suspension question - caster
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: Omaha, NE
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
race suspension question - caster
i posted this in the suspension/wheels/tires forum, but i thought i might get some good answers in here too. i just want to know what numbers guys are running as far as camber, caster, and toe for autox and/or on the track.
https://www.rx7club.com/forum/showth...923#post823923
https://www.rx7club.com/forum/showth...923#post823923
#2
Rotary Freak
iTrader: (6)
I am running 4 degrees caster, 2 degrees negatice camber with my Yoks AVI ( I may run more with my Hoosiers), and a 1/8" toe out.
The caster makes it feel good. The camber makes it turn, and the toe out makes it enter the turn.
If I were able to run turn in spacers under the struts, which would give me Ackerman, I would not need the toe out. But, in CSP I cannot run them in my class.
Good luck
The caster makes it feel good. The camber makes it turn, and the toe out makes it enter the turn.
If I were able to run turn in spacers under the struts, which would give me Ackerman, I would not need the toe out. But, in CSP I cannot run them in my class.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM