Quick Rear Axle Replacement Question
05-18-09, 10:07 PM
#1
djessence
Thread Starter
Quick Rear Axle Replacement Question
Just A quick question.
I am replacing my rear axle with a moser axle from re-speed. I am also replacing the wheel bearings and oil seals.
On the old axle there was in this order:
dust shield--a removable collar--bearing--bearing retainer.
If the removable spacer like collar necessary on the replacements as i do not even see that listed in the FSM, or was it at one point part of the bearing? I originally thought it was part of the bearing until they came off seperately once i had cut the retainer off.
Thanks guys.
I am replacing my rear axle with a moser axle from re-speed. I am also replacing the wheel bearings and oil seals.
On the old axle there was in this order:
dust shield--a removable collar--bearing--bearing retainer.
If the removable spacer like collar necessary on the replacements as i do not even see that listed in the FSM, or was it at one point part of the bearing? I originally thought it was part of the bearing until they came off seperately once i had cut the retainer off.
Thanks guys.
05-19-09, 06:18 PM
#2
Just A quick question.
I am replacing my rear axle with a moser axle from re-speed. I am also replacing the wheel bearings and oil seals.
On the old axle there was in this order:
dust shield--a removable collar--bearing--bearing retainer.
If the removable spacer like collar necessary on the replacements as i do not even see that listed in the FSM, or was it at one point part of the bearing? I originally thought it was part of the bearing until they came off seperately once i had cut the retainer off.
Thanks guys.
I am replacing my rear axle with a moser axle from re-speed. I am also replacing the wheel bearings and oil seals.
On the old axle there was in this order:
dust shield--a removable collar--bearing--bearing retainer.
If the removable spacer like collar necessary on the replacements as i do not even see that listed in the FSM, or was it at one point part of the bearing? I originally thought it was part of the bearing until they came off seperately once i had cut the retainer off.
Thanks guys.
-billy
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM