Quick racing beat exhaust question

Reply Subscribe

Thread Tools

Search this Thread

Dec 3, 2006 | 07:15 PM

defakto

Thread Starter

Full Member

Joined: Mar 2005

Posts: 215

Likes: 0

From: Iowa

Quick racing beat exhaust question

Their streetable exhaust system is bolt up correct, no other modifications need?

Dec 3, 2006 | 07:16 PM

twinkletoes

Eats, Sleeps, Dreams Rotary

iTrader: (17)

Joined: Apr 2006

Posts: 3,740

Likes: 6

From: Las Vegas, NV

Yep, just bolt it right up and go.

Dec 3, 2006 | 07:17 PM

hotimport18

Full Member

Joined: Apr 2004

Posts: 178

Likes: 0

From: southbridge massachusettes

yes derect bolt on nice stuff!

Dec 3, 2006 | 07:18 PM

Rx-7Doctor

Lives on the Forum

iTrader: (13)

Joined: Jul 2004

Posts: 10,584

Likes: 12

From: Oregon

Correct. the only thing that you need to do at the same time is remove the air pump and ACV and put the block off plate where the ACV was....

Dec 3, 2006 | 07:20 PM

defakto

Thread Starter

Full Member

Joined: Mar 2005

Posts: 215

Likes: 0

From: Iowa

So it's not a just bolt and go then, there's a bit more that's needed. I'm planning to remove the rats nest anyway, so that should be a good time to do it then as well.

Dec 3, 2006 | 08:12 PM

Kentetsu

Lives on the Forum

Joined: Jun 2004

Posts: 11,359

Likes: 14

From: Grand Rapids Michigan

There is one exhaust pipe which is not included with the system. But all of the needed block off plates are included.

Dec 3, 2006 | 08:30 PM

Rx-7Doctor

Lives on the Forum

iTrader: (13)

Joined: Jul 2004

Posts: 10,584

Likes: 12

From: Oregon

Quote:

Originally Posted by Kentetsu

There is one exhaust pipe which is not included with the system. But all of the needed block off plates are included.

And that piece is the connecting pipe between the muffler and the silencer.

And yes, the your existing connecting pipe will bolt up if you get the correct year.

Quick racing beat exhaust question

Quick racing beat exhaust question

Trending Topics