1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Question about front end noise

Thread Tools
 
Search this Thread
 
Old 03-06-02, 08:08 PM
  #1  
Special Dark

Thread Starter
 
rxseven's Avatar
 
Join Date: May 2001
Location: oklahoma
Posts: 820
Likes: 0
Received 0 Likes on 0 Posts
Question about front end noise

It's one of those things I had neglected to take care of until now. I always get a "roaring" bearing noise when I turn left which goes away when I straighten the wheel. Thought it was the wheel bearing, no big deal. While I was getting my brakes done I asked my mechanic to repack the front bearings. He told me the inner ones were ok but the outer ones could be replaced which I asked him to do. The problem is I still have the same symptoms. What else do I possibly need to look at? He mentioned one of the rear ones is bad also but the darn noise comes from the front end.

Would appreciate any thoughts on the subject, thanks.
Old 03-06-02, 09:53 PM
  #2  
Senior Member

 
Pittdp's Avatar
 
Join Date: Apr 2001
Location: Arlington, TX, USA
Posts: 561
Likes: 0
Received 0 Likes on 0 Posts
Make sure the wheel nut is snug and that there is no play in the wheel when the car is lifted. Just shake it from side to side. If there is play then you need to tighten some more. I have my bearing replaced and when I drove I heard that loud noise when I turned, I tightened up the nut and it is nice and quit. I think the problem is that they may have not pressed the bearing in all the way and when I drove it started to lossen up.
Old 03-06-02, 10:28 PM
  #3  
Special Dark

Thread Starter
 
rxseven's Avatar
 
Join Date: May 2001
Location: oklahoma
Posts: 820
Likes: 0
Received 0 Likes on 0 Posts
thanks, i'll try out what you said.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
matty
Suspension/Wheels/Tires/Brakes
12
01-18-20 10:39 AM
smikels
Rtek Forum
4
05-12-16 12:34 AM



Quick Reply: Question about front end noise



All times are GMT -5. The time now is 03:20 AM.