progress on my front suspension
#26
1200 gone......but......
iTrader: (24)
Join Date: Oct 2006
Location: so cal
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Billy....
That's some good info that should be posted on your website.
That's some good info that should be posted on your website.
You will need to take a peek at the end of the SS lines to be sure they are safe to use.
See 197x through 1985 all use a crush washer to seat and seal the line to the caliper body. The TII calipers wer made to accept a inverted flair to seat and seal the line. Our SS lines will serve for both style. Some other brands do not.
To see if your line will work with TII calipers take a look at the very end of the line on the end that goes into the caliper. The attached image is not of a brake line but the fitting on the right has the INTERNAL taper needed. This is the angled portion at the end of the center hole in the fitting.
If you lines have the INTERNAL taper and does not screw all the way down before seating then they will work. If the center hole is simply flat on the end, they will not work.
-billy
See 197x through 1985 all use a crush washer to seat and seal the line to the caliper body. The TII calipers wer made to accept a inverted flair to seat and seal the line. Our SS lines will serve for both style. Some other brands do not.
To see if your line will work with TII calipers take a look at the very end of the line on the end that goes into the caliper. The attached image is not of a brake line but the fitting on the right has the INTERNAL taper needed. This is the angled portion at the end of the center hole in the fitting.
If you lines have the INTERNAL taper and does not screw all the way down before seating then they will work. If the center hole is simply flat on the end, they will not work.
-billy
#29
i'm a poser
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
everything is in except for sway bar and brake lines.
i guess tmw i will fix my passenger camber plate. and maybe oil change and coolant flush.
what else can I do?
i guess tmw i will fix my passenger camber plate. and maybe oil change and coolant flush.
what else can I do?
#33
i'm a poser
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
billy, its fine. you were quick, ups wasn't.
on another note, im planning on getting demonspawn's ST? front sway bar, but we need new links for it. might have to get them from mazdatrix? or maybe billy might know something?
actually i am sure it isn't the normal ST bar, unless mazdatrix's picture is wrong
on another note, im planning on getting demonspawn's ST? front sway bar, but we need new links for it. might have to get them from mazdatrix? or maybe billy might know something?
actually i am sure it isn't the normal ST bar, unless mazdatrix's picture is wrong
#34
Banned. I got OWNED!!!
iTrader: (3)
billy, its fine. you were quick, ups wasn't.
on another note, im planning on getting demonspawn's ST? front sway bar, but we need new links for it. might have to get them from mazdatrix? or maybe billy might know something?
actually i am sure it isn't the normal ST bar, unless mazdatrix's picture is wrong
on another note, im planning on getting demonspawn's ST? front sway bar, but we need new links for it. might have to get them from mazdatrix? or maybe billy might know something?
actually i am sure it isn't the normal ST bar, unless mazdatrix's picture is wrong
-billy
#35
i'm a poser
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
could someone, trochoid, post a pic of their st bar? does it have 3 different holes? i might go the route of heating it up, but would rather use what it was designed for, if i can get the links that is*
#36
Wrkn Toyota, Rootn Wankel
Join Date: Sep 2007
Location: "Haystack" Hayward, CA
Posts: 1,642
Likes: 0
Received 1 Like
on
1 Post
I'll double check the angle and post some better pictures tomorrow , the thing is sitting in the back of my truck now and its been sandblasted so should be easier to see.
#38
i'm a poser
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
got them in.. bolted the brakes back in, called it a day. BTW i have some parts that i took off from the swap. se hubs & rotors, pads, se crossmember and engine mount, stock se softlines. think that's about it.
changing the lines only took me an hour. i'm pretty stupid at brakes haha. took my gf to go shopping. so now she's happy. gotta keep her happy so that she doesn't force me to sell the car >.>
changing the lines only took me an hour. i'm pretty stupid at brakes haha. took my gf to go shopping. so now she's happy. gotta keep her happy so that she doesn't force me to sell the car >.>
#39
i'm a poser
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
after looking around, it looks like demonspawn's sway bar is a tmc... are they still making things?
i plan on upgrading to a respeed sway bar... soon. just thought i could get something cheap... maybe not
i plan on upgrading to a respeed sway bar... soon. just thought i could get something cheap... maybe not
#40
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,950
Received 2,680 Likes
on
1,896 Posts
its a ground control bar! dont forget the guy who built that car in the first place is around
#42
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,950
Received 2,680 Likes
on
1,896 Posts
#45
Banned. I got OWNED!!!
iTrader: (3)
-billy
#46
i'm a poser
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
that's what i was thinking.
actually we are able to get the rears to bleed fine, but when we went to the front that was when we had trouble. so i guess it could be the master. or do i have to rebuild the calipers? i'm going to see what carquest can get me.
i was very frustrated. its been almost 1 month since i started, and i'm really really itching to drive it. when i'm pumping it, it seems like air is being reintroduced into the system
actually we are able to get the rears to bleed fine, but when we went to the front that was when we had trouble. so i guess it could be the master. or do i have to rebuild the calipers? i'm going to see what carquest can get me.
i was very frustrated. its been almost 1 month since i started, and i'm really really itching to drive it. when i'm pumping it, it seems like air is being reintroduced into the system
#47
Banned. I got OWNED!!!
iTrader: (3)
that's what i was thinking.
actually we are able to get the rears to bleed fine, but when we went to the front that was when we had trouble. so i guess it could be the master. or do i have to rebuild the calipers? i'm going to see what carquest can get me.
i was very frustrated. its been almost 1 month since i started, and i'm really really itching to drive it. when i'm pumping it, it seems like air is being reintroduced into the system
actually we are able to get the rears to bleed fine, but when we went to the front that was when we had trouble. so i guess it could be the master. or do i have to rebuild the calipers? i'm going to see what carquest can get me.
i was very frustrated. its been almost 1 month since i started, and i'm really really itching to drive it. when i'm pumping it, it seems like air is being reintroduced into the system
Oh...are the calipers used? They may need a rebuild. Check for leaks at the lines near the calipers, body and master cylinder connections. Calipers and the master cylinder are easy to rebuild yourself and the rebuild kits are not to much.
-billy
#49
Lives on the Forum
I may be wrong, but it seems to me that if the calipers aren't leaking fluid and aren't "frozen", then they should be fine. I think I would start with the MC and go from there personally. But like I said, I could be mistaken.