1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Problems starting car

Thread Tools
 
Search this Thread
 
Old Jan 25, 2008 | 11:19 AM
  #1  
sstcabinboy's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 66
Likes: 0
From: jersey
Problems starting car

when I try and start my car it will turn on when I crank it but as soon as I stop cranking it shuts off. If I hold it cranking I can actually rev it and it runs normal but again as soon as I stop cranking it shuts right off. Not sure whats wrong.
Reply
Old Jan 25, 2008 | 10:28 PM
  #2  
sstcabinboy's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 66
Likes: 0
From: jersey
bump

Anyone got advice?
Reply
Old Jan 25, 2008 | 11:34 PM
  #3  
2fast2rotar's Avatar
Registered Loser
Tenured Member 05 Years
 
Joined: Nov 2007
Posts: 206
Likes: 0
From: Concord, NC
So it will run, but will not idle?? Or when you take the key off "start" it shuts off??

How about a year, model, etc...
Reply
Old Jan 25, 2008 | 11:49 PM
  #4  
1983GSP's Avatar
just another joe
Tenured Member 05 Years
 
Joined: Apr 2007
Posts: 295
Likes: 0
From: Pascagoula, MS
replace the ignition switch. the electrical part not the key part. the contacts are bad
Reply
Old Jan 27, 2008 | 05:08 PM
  #5  
sstcabinboy's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 66
Likes: 0
From: jersey
Does this include the piece I need? If not do you have a picture of what I need. Heres the link. Thanks

http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us
Reply
Old Jan 27, 2008 | 05:28 PM
  #6  
trochoid's Avatar
Old Fart Young at Heart
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 8
From: St Joe MO
Yep.
Reply
Old Jan 28, 2008 | 07:57 PM
  #7  
Toxindude's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2007
Posts: 330
Likes: 0
From: Omaha, Nebraska
I think I am having the same problem accept that it can get my car started but barely car starts and runs but very rough . only lights that work are the head lights , no dash blinker or brake lights . In the warning light cluster the door ajar light comes on when I either mess with the turn signal or switch on the dash light or mess with the map light on the ceiling or pressing the brake pedal . It does not happen when messing with windshieild wiper switch .

My car is an 86 GSL N/A

Min
Reply
Old Jan 28, 2008 | 08:03 PM
  #8  
FBsliderseven's Avatar
domokun!
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 1,063
Likes: 0
From: hawaii
Originally Posted by Toxindude
I think I am having the same problem accept that it can get my car started but barely car starts and runs but very rough . only lights that work are the head lights , no dash blinker or brake lights . In the warning light cluster the door ajar light comes on when I either mess with the turn signal or switch on the dash light or mess with the map light on the ceiling or pressing the brake pedal . It does not happen when messing with windshieild wiper switch .

My car is an 86 GSL N/A

Min
go to the 2nd gen section. lol your in the first gen section...
but im pretty sure that you have cold solder joints on the computer
idk which one though.
Reply
Old Jan 28, 2008 | 09:41 PM
  #9  
kutukutu1's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
Liked
iTrader: (5)
 
Joined: Jan 2008
Posts: 1,300
Likes: 60
From: Southfield, MI
Check if your injector in the car is working right and its adjusted right because that happened to my 84 and it was the injector, which wasent adjusted right.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM




All times are GMT -5. The time now is 12:10 AM.