i was looking over a tread on here about how to strip down a nikki to its bare nessesity. one thing mentioned was removing emissions and etc. then he mention using premix instead of OMP i think. What is he talking about?

 

if you remove all the OMP parts and plug everything you have to run premix. i use 1 oz of 2-stroke premix for every gallon of gas. add it to the tank before the gas

 

Personally, I left the OMP in place and hooked up as per factory. I also add ~1/2oz stroke oil per gallon of gas, as added insurance.
Since I use an oil that is designed to leave only soft, flaky carbon if/when burned, I don't worry about the extra oil causing carbon buildup.

 

i did the conversion and removed my OMP on my 2nd gens. it was fairly easy. i had some incentive to do it since my OMP lines were leaking

 

i just think the omp looks fugly. i'm making the engine as simple as possible. removed all the emissions, simplified the wiring harness, now i want to strip the carb, i searched omp and got better results as to what i was searching for, thanks for your imput guys