please help me with my 1980
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: KY
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
please help me with my 1980
I have requested help below but I am starting a new thread in hopes that I will get this figured out. I am trying to get my 1980 wired of for a direct fire setup. Here is the dilema. The leading coil has the following hooked to it: two yellow and green wires on the positive side and one black wire and two black and white wires. WTF is up with that? What are all these wires?
I need some help.
I need some help.
#4
Heck Yes!
Join Date: Apr 2003
Location: Chatham, Ontario, Canada
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
Look you just need to be patiant.
Some where there is a directfire how to.
This forum has many knolagabel people but they don't monitor it 24/7
so just relax and some help should come your way.
In the mean time use the search function
Good luck
anthrax
Some where there is a directfire how to.
This forum has many knolagabel people but they don't monitor it 24/7
so just relax and some help should come your way.
In the mean time use the search function
Good luck
anthrax
#5
Senior Member
Thread Starter
Join Date: Sep 2003
Location: KY
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
You do realize the ignitor setup for a 1980 is different than a 1981-1985. I DID use the search feature and I got as far as I could with it. I am asking for direct help. So please back off with the "use the search feature". "Sorry - no matches. Please try some different terms."
I need to know what the wires are and what I need to do for a direct fire setup based on a 1980 model.
I need to know what the wires are and what I need to do for a direct fire setup based on a 1980 model.
Thread
Thread Starter
Forum
Replies
Last Post