n1sh1

Hi everyone. I had a question for the veterans out there, in regards to some strut inserts i have purchased.

I bought a pair of adjustable pair of Koni (red) front inserts from the good ol' market called eBay. When i have received them, they were slightly dented on the tubing (the red part). I would say it was dropped on a flat surface and maybe went in about 1 millimeter or so.

Would something like this affect the performance of the shock? I would guess the shape and the oil capacity might change. If not, is the outer portion just a shell?

Also, as far as the adjustment of the dampers, does this usually come with a ****? If not, can another tool, such as a allen / hex key used?

This didn't come with any instructions whatsoever, so i have no idea. Also, this will be my first set of Koni's (i usually buy Bilsteins or regular Gabriels or Monroes, which are all not adjustable). Thanks in advance!



Jeff

RacerX7fb

Get in touch with Tripoint Engineering in Canoga Park. They are KONI rebuilders and can give you the best answer.