Pic's of my new turbo
Thread Starter
Rotary Freak
Joined: Feb 2001
Posts: 2,524
Likes: 0
From: MN
Pic's of my new turbo
I'm sure you guys all know about Directfreak's and Mike-P-28's cosmo/FB project (god knows Mike post ****** all the damn time about it.... 
j/k mike hehe) but I thought I'd give you guys a update on my project as well.
Just got my new huffer the other day and I can't wait till my engine gets to rotate it
, here she is.
It's a TD07 with a 25g compressor and a 17cm exh housing.
That manifold that Greg posted here a while back is coming to my house on friday (if fedex tracking is right) and I'll have to post some pic's of them all together if it all fits *crosses fingers*.
I have a thread going over at the single turbo section also but I figured that most of you guys don't frequent that section often so I posted here also.
What do you guys think?
j/k mike hehe) but I thought I'd give you guys a update on my project as well.Just got my new huffer the other day and I can't wait till my engine gets to rotate it
, here she is. It's a TD07 with a 25g compressor and a 17cm exh housing.
That manifold that Greg posted here a while back is coming to my house on friday (if fedex tracking is right) and I'll have to post some pic's of them all together if it all fits *crosses fingers*.
I have a thread going over at the single turbo section also but I figured that most of you guys don't frequent that section often so I posted here also.
What do you guys think?
Thread Starter
Rotary Freak
Joined: Feb 2001
Posts: 2,524
Likes: 0
From: MN
RotorMotorDriver- who said I knew what I was doing? 
Direstfreak- all I know is it has a 25g compressor and a 17cm exhaust housing. I've herd you can upgrade this turbo to a T-78. So I shall call it......Mini T-78 muhahahaah Muhahahahahaa.. sorry, had to do it
peejay- Holset?...did you say Holset? Here you go... the yellow turbo came off a 400-somthing cid diesel engine. The exhaust housing on it is HUGE and I guess the compressor has technology from the 60's built into it 
so thats why I got this TD07 (well that and it made 320 untuned rwhp @ 10psi on a 13b )
Direstfreak- all I know is it has a 25g compressor and a 17cm exhaust housing. I've herd you can upgrade this turbo to a T-78. So I shall call it......Mini T-78 muhahahaah Muhahahahahaa.. sorry, had to do it
peejay- Holset?...did you say Holset? Here you go...
the yellow turbo came off a 400-somthing cid diesel engine. The exhaust housing on it is HUGE and I guess the compressor has technology from the 60's built into it so thats why I got this TD07 (well that and it made 320 untuned rwhp @ 10psi on a 13b )Last edited by setzep; Aug 8, 2002 at 05:15 PM.
Punk Ass Bitch
Joined: Dec 2003
Posts: 99
Likes: 0
From: Welland, Ontario
I wanna have a MASSIVE turbo on a 12a with a bridgy! MASSIVE I'm thinkin' ball-bearings I'm thinkin Turbonetics T-**Insert rediculous number here** turbos!!! Air to Water intercooled? Dual Oil coolers? Dry-Sump oil system? Stainless steel everything?!?!
Mwuhahahahahahahha!!!!!
Mwuhahahahahahahha!!!!!
Trending Topics
Originally posted by setzep
RotorMotorDriver- who said I knew what I was doing?
Direstfreak- all I know is it has a 25g compressor and a 17cm exhaust housing. I've herd you can upgrade this turbo to a T-78. So I shall call it......Mini T-78 muhahahaah Muhahahahahaa.. sorry, had to do it
peejay- Holset?...did you say Holset? Here you go... the yellow turbo came off a 400-somthing cid diesel engine. The exhaust housing on it is HUGE and I guess the compressor has technology from the 60's built into it so thats why I got this TD07 (well that and it made 320 untuned rwhp @ 10psi on a 13b )
RotorMotorDriver- who said I knew what I was doing?
Direstfreak- all I know is it has a 25g compressor and a 17cm exhaust housing. I've herd you can upgrade this turbo to a T-78. So I shall call it......Mini T-78 muhahahaah Muhahahahahaa.. sorry, had to do it
peejay- Holset?...did you say Holset? Here you go...
the yellow turbo came off a 400-somthing cid diesel engine. The exhaust housing on it is HUGE and I guess the compressor has technology from the 60's built into it so thats why I got this TD07 (well that and it made 320 untuned rwhp @ 10psi on a 13b ) Not bad if you are worried about traction limited runs!
Felix
Originally posted by setzep
RotorMotorDriver- who said I knew what I was doing?
Direstfreak- all I know is it has a 25g compressor and a 17cm exhaust housing. I've herd you can upgrade this turbo to a T-78. So I shall call it......Mini T-78 muhahahaah Muhahahahahaa.. sorry, had to do it
peejay- Holset?...did you say Holset? Here you go... the yellow turbo came off a 400-somthing cid diesel engine. The exhaust housing on it is HUGE and I guess the compressor has technology from the 60's built into it so thats why I got this TD07 (well that and it made 320 untuned rwhp @ 10psi on a 13b )
RotorMotorDriver- who said I knew what I was doing?
Direstfreak- all I know is it has a 25g compressor and a 17cm exhaust housing. I've herd you can upgrade this turbo to a T-78. So I shall call it......Mini T-78 muhahahaah Muhahahahahaa.. sorry, had to do it
peejay- Holset?...did you say Holset? Here you go...
the yellow turbo came off a 400-somthing cid diesel engine. The exhaust housing on it is HUGE and I guess the compressor has technology from the 60's built into it so thats why I got this TD07 (well that and it made 320 untuned rwhp @ 10psi on a 13b )
Old [Sch|F]ool
Joined: May 2001
Posts: 12,865
Likes: 572
From: Cleveland, Ohio, USA
What's the model of that Holset? Just curious...
Note that the actual compressor inlet is only about 2" across.
also i linked the BIG turbo pic to a friend.... here's the extent of the conversation
oilohrnoc: hey, i found a turbo for your car
him: LINK!
oilohrnoc: http://www.atlascopcoact.com/private/temp/shop1.jpg
him: fuuuuuuuuuuck
oilohrnoc: might need a trailer
What IS that thing for, a tanker diesel????
Note that the actual compressor inlet is only about 2" across.
also i linked the BIG turbo pic to a friend.... here's the extent of the conversation
oilohrnoc: hey, i found a turbo for your car
him: LINK!
oilohrnoc: http://www.atlascopcoact.com/private/temp/shop1.jpg
him: fuuuuuuuuuuck
oilohrnoc: might need a trailer
What IS that thing for, a tanker diesel????
Last edited by peejay; Aug 8, 2002 at 06:07 PM.
Full Member
Joined: Mar 2001
Posts: 133
Likes: 0
From: Sacramento, California
Hey, out of curiosity, if I put that in my car, would my car be stock? It even says so on that MONSTER of a Turbo! Lets see.... An additional couple hundred HP and about hm....2000 pounds or so?
Chris
Chris
Thread Starter
Rotary Freak
Joined: Feb 2001
Posts: 2,524
Likes: 0
From: MN
Originally posted by peejay
What's the model of that Holset? Just curious...
What's the model of that Holset? Just curious...
Assy - 3525038
Serial - 968005
Engine - RE.26414
Type - H1E
thats all thats off the comp housing.
Thread Starter
Rotary Freak
Joined: Feb 2001
Posts: 2,524
Likes: 0
From: MN
Originally posted by moremazda
Holy christ thats big. That would take 1st, 2nd, and about half of 3rd gear to spool up!! That would put a 12a through the quater in roughly 13.5 @ about 145 mph
Not bad if you are worried about traction limited runs!
Holy christ thats big. That would take 1st, 2nd, and about half of 3rd gear to spool up!! That would put a 12a through the quater in roughly 13.5 @ about 145 mph
Not bad if you are worried about traction limited runs!
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
Re: Pic's of my new turbo
Originally posted by setzep
I'm sure you guys all know about Directfreak's and Mike-P-28's cosmo/FB project (god knows Mike post ****** all the damn time about it.... j/k mike hehe) but I thought I'd give you guys a update on my project as well.
I'm sure you guys all know about Directfreak's and Mike-P-28's cosmo/FB project (god knows Mike post ****** all the damn time about it....
j/k mike hehe) but I thought I'd give you guys a update on my project as well.BTW: I got all the IC piping done, everything in the engine compartment is done except the injectors and the radiator shrouding... Just those 2 things, my driveshaft and figure out where to put my fuel stuff and its DONE!
'Last Minute' Rallying
Joined: May 2002
Posts: 1,193
Likes: 0
From: Lincoln, England
hehhehehehe I work at Alstom Gas Turbines In the Uk ... we make turbo's that size and bigger about 100 metres from where I am sitting at the moment .... although the company is still called Napier Turbochargers its on the same site as us
.... although the company is still called Napier Turbochargers its on the same site as us
