Personal Opinions Welcomed
#26
I can has a Hemi? Yes...
iTrader: (2)
If the ATF doesn't work, then...
You could do the REBUILD Yourself.
There are VIDEOS to teach you how.
You could RENT the tools for a fraction of the cost.
You may, want to PORT WITH A TEMPLATE real cheap.
You will likely be able to reuse 90% of the parts, and you will receive plenty of help here.
(IF THE FREAKIN SERVERS START WORKING! )
All in all, this options will probably cost you less than $400.
You could do the REBUILD Yourself.
There are VIDEOS to teach you how.
You could RENT the tools for a fraction of the cost.
You may, want to PORT WITH A TEMPLATE real cheap.
You will likely be able to reuse 90% of the parts, and you will receive plenty of help here.
(IF THE FREAKIN SERVERS START WORKING! )
All in all, this options will probably cost you less than $400.
#27
smog nazi destroyer
i have a 12a driveline that would be a perfect contender for a rebuild if any of you are looking to buy one.. i think it just has a stuck seal and carbon build up. not sure exactly but i am planing on disecting it next week, so i should know soon enough.
#28
Driven a turbo FB lately?
iTrader: (1)
Originally posted by Felix Wankel
If money is such an issue, put the ******* thing in storage till you get money. A half assed car will do nothing but disappoint you.
If money is such an issue, put the ******* thing in storage till you get money. A half assed car will do nothing but disappoint you.
#29
smog nazi destroyer
that is my problem now.. i had money when i started my venture. got things running really nice too. but now i am job less and subsiquently money less so the rest of the project had to be put on hold.
damn shame too, because i love driving her
damn shame too, because i love driving her
#30
Originally posted by Directfreak
If the ATF doesn't work, then...
You could do the REBUILD Yourself.
There are VIDEOS to teach you how.
You could RENT the tools for a fraction of the cost.
You may, want to PORT WITH A TEMPLATE real cheap.
You will likely be able to reuse 90% of the parts, and you will receive plenty of help here.
(IF THE FREAKIN SERVERS START WORKING! )
All in all, this options will probably cost you less than $400.
If the ATF doesn't work, then...
You could do the REBUILD Yourself.
There are VIDEOS to teach you how.
You could RENT the tools for a fraction of the cost.
You may, want to PORT WITH A TEMPLATE real cheap.
You will likely be able to reuse 90% of the parts, and you will receive plenty of help here.
(IF THE FREAKIN SERVERS START WORKING! )
All in all, this options will probably cost you less than $400.
~T.J.
#31
Originally posted by Directfreak
If the ATF doesn't work, then...
You could do the REBUILD Yourself.
There are VIDEOS to teach you how.
You could RENT the tools for a fraction of the cost.
You may, want to PORT WITH A TEMPLATE real cheap.
You will likely be able to reuse 90% of the parts, and you will receive plenty of help here.
(IF THE FREAKIN SERVERS START WORKING! )
All in all, this options will probably cost you less than $400.
If the ATF doesn't work, then...
You could do the REBUILD Yourself.
There are VIDEOS to teach you how.
You could RENT the tools for a fraction of the cost.
You may, want to PORT WITH A TEMPLATE real cheap.
You will likely be able to reuse 90% of the parts, and you will receive plenty of help here.
(IF THE FREAKIN SERVERS START WORKING! )
All in all, this options will probably cost you less than $400.
~T.J.
#32
Driven a turbo FB lately?
iTrader: (1)
YEAH ok, and see ya rebuilding it again in the next 6 months to a year... TRUST ME i have been there, same place and got the same results ... But your young, you will find out the hard way like I did and everyone else. By the way mazdatrix and Racing beat are HIGHER THAN HELL , if you GOT THE MONEY and want a FULL rebuild kit for a 12A www.revolutionrotary.com $596
#33
YEAH ok, and see ya rebuilding it again in the next 6 months Mto a year... TRUST ME i have been there, same place and got the same results ... But your young, you will find out the hard way like I did and everyone else. By the way mazdatrix and Racing beat are HIGHER THAN HELL , if you GOT THE MONEY and want a FULL rebuild kit for a 12A www.revolutionrotary.com $596
~T.J.
#34
Registered User
iTrader: (1)
Join Date: Dec 2001
Location: Signal Hill, Ca.
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
I guess I'll have to keep posting this.
RR has good prices.
Their price $596
Our price for same parts $592 (model/year specific)
There IS NO DEFINITION of a "rebuild kit" - it can be about anything.
Be sure you are comparing same to same.
Our "kit" includes ALL parts that go on the rotors - they do not include little things like oil control rings ($203.28 for the set), and side seals ($115.44 for 86-91 set), etc.
They include bearings, we do not.
etc
Racing Beat, I believe, includes all we do + gasket set - we do gasket set seperate (fewer part numbers to maintain).
Bottom line -- you can NOT compare a "rebuild kit" to a "rebuild kit" from two different vendors !! - only the individual parts that are in them.
RR has good prices.
Their price $596
Our price for same parts $592 (model/year specific)
There IS NO DEFINITION of a "rebuild kit" - it can be about anything.
Be sure you are comparing same to same.
Our "kit" includes ALL parts that go on the rotors - they do not include little things like oil control rings ($203.28 for the set), and side seals ($115.44 for 86-91 set), etc.
They include bearings, we do not.
etc
Racing Beat, I believe, includes all we do + gasket set - we do gasket set seperate (fewer part numbers to maintain).
Bottom line -- you can NOT compare a "rebuild kit" to a "rebuild kit" from two different vendors !! - only the individual parts that are in them.
#35
Driven a turbo FB lately?
iTrader: (1)
Originally posted by RotorMotorDriver
Why would I be rebuilding it in 6 months or so? Are you saying that I'm gonna do this wrong? What do you mean you have been there? Are you saying that you rebuilt an engine that you had to rebuild again 6 months later because you did it wrong? Help me, Im really confused by what you just said...
~T.J.
Why would I be rebuilding it in 6 months or so? Are you saying that I'm gonna do this wrong? What do you mean you have been there? Are you saying that you rebuilt an engine that you had to rebuild again 6 months later because you did it wrong? Help me, Im really confused by what you just said...
~T.J.
@mazdatrix I have ordered a LOT of parts from you guys in the past and you have always been 100% on custom service and quality of parts But if I can find the same Mazda made kit elsewhere and it have more parts in it, Im gonna go there... A dollar is a dollar... And yes you are right make SURE you check to see what you want is included. Only thing I see that dont include was the side seals themselves and the oil seals on the rotors. Everything else is there...Why does it always have to be straight up retail, I never pay retail! I own my own business and never charge retail to my customers. I show them retail sell them at a discount price... I sell to more people that way and I make more money in the long run, kinda like Sam Walton and Wal-Mart, personally I hate wal-mart but you get the idea...
Heres a pic of all of it together...
Last edited by MIKE-P-28; 03-18-02 at 06:56 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
rx8volks
Canadian Forum
0
09-16-15 09:07 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM