OMP location
06-12-06, 05:27 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Idaho
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
OMP location
I know the topic of OMP is beaten sensless but I am new to rotaries and I don't know where to look. I have an 83 rx7 12a. Also I am not looking for a link to another thread so if you don't have time to help me, then don't waste my time. 
06-12-06, 05:45 PM
#2
Rotary Freak
The front, right side (pasanger side) of the engine block on the bottom.
You'll know it when you see it. (a couple tubes comming out and going up, and an actuator rod comming down from the carb)
You'll know it when you see it. (a couple tubes comming out and going up, and an actuator rod comming down from the carb)
06-12-06, 05:52 PM
#4
Rotary Freak
The little rod from the carb linkage operates a lever on the OMP that regulates the amout of oil fed into the carb depenting on throttle position.
I took mine off, blocked the hole and haven't looked back. Just one more thing to leak and fail in my experiance.
I took mine off, blocked the hole and haven't looked back. Just one more thing to leak and fail in my experiance.
Thread
Thread Starter
Forum
Replies
Last Post
