Okay... What the...? Strange problems with Roxette
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: charlotte, NC
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Okay... What the...? Strange problems with Roxette
so lemme just start off and tell you i hant messed with my carb or anything in about two months....k .... with that said... two nights ago my baby roxette started acting weird... every once and a while as i would shift i noticed the rpms still rising as the clutch was in, and my ffot was off the accelerator pedal.... intill today when i started her this morning.... it never gets " unstuck" and i found the only way to get the rpms from not rising is by pulling the choke out...... so here i am driving today ..... gas. clutch .....lets off accelerator pedal pull choke.. shift push gas ... let off gas... pu;ll choke... gas..... meen while... i have permenent cruise control... intill i pull the choke...???!?!?!?!!! >_< # what is up anyone???? kthanksbye!
#2
Mmmm Cheeze....
iTrader: (2)
Join Date: Jul 2004
Location: Oklahoma
Posts: 748
Likes: 0
Received 0 Likes
on
0 Posts
If you have cruise control check it out, everything about it, vaccum hoses as well. Also check your throttle cable to make sure it isn't sticking. Last spray some carb cleaner down it to make sure your shutters aren't sticking, (even if only slightly). (But I am sure that you already did this) That is all I know. Mabye someone else more knowledgable will come along.
#3
Hmmm. Do the simple stuff first, hit the insides of your carb with carb cleaner and hit the outsides with WD-40 (or use a full out penetrant but relubricate afterwards). Check your fluids, I know it sounds wierd, but it can't hurt right??
Not to be insulting, but swap in a new driver gasket. Someone may notice something odd that you wouldn't because the problem set in gradually.
To narrow down the problem, disconnect things until it stops doing it. Start by removing your cruise control cable from the carb linkage. Drive it. Repeat for the hot start assist (lil black box with a cable on the drivers shock tower) and the choke cable. If it stops reconnect, your choke, hot start assist and cruise control. IMHO I would only reconnect the choke, you can do exactly what the hot start and the cruise do with your right foot.
I would put money on the hot start assist with the cruise control in a close second.
Not to be insulting, but swap in a new driver gasket. Someone may notice something odd that you wouldn't because the problem set in gradually.
To narrow down the problem, disconnect things until it stops doing it. Start by removing your cruise control cable from the carb linkage. Drive it. Repeat for the hot start assist (lil black box with a cable on the drivers shock tower) and the choke cable. If it stops reconnect, your choke, hot start assist and cruise control. IMHO I would only reconnect the choke, you can do exactly what the hot start and the cruise do with your right foot.
I would put money on the hot start assist with the cruise control in a close second.
#4
Rotoholic Moderookie
iTrader: (4)
My guess is either vacuum leak, or something with your linkage/springs.
Check the AAB hose that goes to the back of the intake manifold, then check around your linkages. Other than that, I wouldn't know it unless I saw it.
I hope you don't mind, I was in a "thread ****" kinda mood today so I fixed up your title a bit
Jon
Check the AAB hose that goes to the back of the intake manifold, then check around your linkages. Other than that, I wouldn't know it unless I saw it.
I hope you don't mind, I was in a "thread ****" kinda mood today so I fixed up your title a bit
Jon
#5
Senior Member
Thread Starter
Join Date: Nov 2003
Location: charlotte, NC
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
ha its ok i did that on purpose cause im just silly ... anyway i have done all of this.. my rast nest is removed as well as hot start assist, and cruise control.... i will check this out again... but im so confussed still... omfg what is wrong with my F'n 7
Trending Topics
#8
Lapping = Fapping
iTrader: (13)
Could it be the emergency throttle return spring? Or as Felix Miata calls it, the safety spring. http://members.ij.net/mrmazda/btraps.html#CARBSPRINGS
#9
Senior Member
Thread Starter
Join Date: Nov 2003
Location: charlotte, NC
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
kk!!!!!! all fixed ... it was many of these problems........ dashpot, ap, return spring... so we pulled the carb off, ripped lots of uneccessary things off. heh.... ripped out the vac secs. and converted to mech secs. wooooooohoooooooo all better!!!!!!!!!!!!! and what a fun ride home it was!!!!!!!!!!!!!! thanks everyone , kthanksbye!
eat some cheese !
hahaha that was for robert !!!!!
eat some cheese !
hahaha that was for robert !!!!!
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
0
09-18-15 03:39 PM