Oil Cooler
#2
Rotary Freak
Join Date: Sep 2002
Location: SF BayArea
Posts: 2,815
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
can someone post a pic or explain the difference in the mounting brackets between the gsl-se oil coolers and the 12a coolers? I know the 12a coolers mount under the radiator but would like to see the brackets compared to se? I have a se cooler.
#11
Super Moderator
iTrader: (3)
Here is a pic from Mazdatrix. It is not a very big pic, but you can see the differences. The top is the early oil cooler (79-82), the middle is the GSL-SE, the bottom is from a 2nd gen.
The SE cooler has the lines coming out at an angle and have a bit different mounting setup.
Kent
The SE cooler has the lines coming out at an angle and have a bit different mounting setup.
Kent
#13
Originally Posted by gsl-se addict
Here is a pic from Mazdatrix. It is not a very big pic, but you can see the differences. The top is the early oil cooler (79-82), the middle is the GSL-SE, the bottom is from a 2nd gen.
The SE cooler has the lines coming out at an angle and have a bit different mounting setup.
Kent
The SE cooler has the lines coming out at an angle and have a bit different mounting setup.
Kent
#14
Blood, Sweat and Rotors
iTrader: (1)
Originally Posted by bliffle
Nice looking REPU, DriveFast! I'm red with embarassment, mine is so dusty. Or maybe I'm green with green envy? I always liked that REPU Kermit green.
B
B
#19
It's either this or porn
Join Date: May 2005
Location: Olympia Washington
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RotaryRevn
thanks for the pic kent. I bet the reason the lines on the se came out at an angle was to clear the sway bar. That bar runs right through the middle of the 2 lines.
It was a 1st gen early one. I got it in but man that was a lot of work.
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM