1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

No Bubbles

Thread Tools
 
Search this Thread
 
Old Oct 26, 2007 | 04:01 PM
  #1  
badandyrx7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 232
Likes: 0
From: Cali
No Bubbles

so ive been having hot and cold start issues including white smoke from the exauhst and a very minnor coolant lose. i just did a bubble test because i was almost sure it was a seal. but the only time i saw a bubble was when i gave it some gas and the t sat opened up there where like 3 big bubble then it was clam again. i let it idle for about 20min and no bubbles. then i shut her down and i noticed 2 more bubbles escape a few minutes later. what else could be causing this? i tried to take out the leading plug to see if i had fluid in the housing but i didnt see any. what i did notice was a very brown/black plug like its running rich?

i need a little help.
Reply
Old Oct 27, 2007 | 04:00 PM
  #2  
3rd and final 7's Avatar
wheres the water goin?
Tenured Member 10 Years
iTrader: (9)
 
Joined: May 2005
Posts: 1,586
Likes: 0
From: Nor Cal
those few bubbles could be the loss that you are having. if you can i would let the car sit over night and then check then pull the spark plug and chk. if you have a
12A it very well could be the 2 orings between the intake manifold and the block. when you say very minor coolant loss how much, is it a cup of coolant a week?
when was the last time you changed your plugs and if you go to the top of the 1st gen page there are the FAQ's that will help
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew7dg
1st Generation Specific (1979-1985)
3
Aug 6, 2017 01:41 PM
Frisky Arab
2nd Generation Specific (1986-1992)
5
Sep 4, 2015 06:17 PM
badass7
3rd Generation Specific (1993-2002)
0
Mar 20, 2002 12:44 PM




All times are GMT -5. The time now is 08:55 PM.