just wondering if any one has used one and what they think about it ?

 

but i would use CO2 it would run cooler and be cheaper co2 is a much better setup. if you want to run the spray bar that would be your best bet

 

yea i would definitely be using a spray bar for sure and yea co2 kits are way cheaper glad you mentioned that

 

yea i would definitely be using a spray bar for sure and yea co2 kits are way cheaper glad you mentioned that\



ok i don't know why it posted twice how do i delete ?

 

can someone explain? Is this to super cool air that goes through the intercooler and into the engine?

 

yes it would be to supercool the intercooler they have a normal purge button to hit while you are staging or whenever and they also have a WOT switch so you can use it everytime you go WOT

 

if you spray Co2 into the intercooler, in essence, you are spraying Co2 into the engine compartment.

your engine needs oxygen to run. take the hit to the wallet and run No2.

you will gain hp from the little bit of No2 that makes it to air filter, plus your intercooler will get cold as well.

 

ive never really agreed with that. it all depends on the setup he is running and non the less its a very small spray

 

it's not spraying it into the intercooler it sprays the outside surface of the intercooler

 

http://video.google.com/videoplay?do...arch&plindex=2
here's a demo

 

its sprays it on teh ic. making the air that passes thrw it colder. kinda like weting ur hand against teh wind

 

Don't waste the No2 spraying the intercooler, spray it in the throttle body or carb hat. It will cool the intake charge and you will get the power benefit as well.

One of the local guys here did a No2 spray bar and the power difference wasn't noticeable. Ran a 50 shot through the carb hat and what a difference.

If cooling the intake is what your after go with methanol injection. Check out coolingmist website. Just my opinion.

 

cool ill check into that