need new starter bolts
#2
They are 14mm heads. The long bolt is 13cm long with 2cm threaded. Don't know about the short one or what type of thread, but i used the long bolt from my AC pump, it was slightly longer but worked fine.
#3
Rotary Freak
Join Date: Sep 2004
Location: Kitchener, Ont. Canada
Posts: 1,901
Likes: 0
Received 0 Likes
on
0 Posts
they are 2 different sizes, and just to make sure you know, the upper one goes through the starter into the tranny, and the lower one goes through the engine, then the tranny, and threads into the starter. they are backwards
#4
love the braaaap
Originally Posted by nick1
they are 2 different sizes, and just to make sure you know, the upper one goes through the starter into the tranny, and the lower one goes through the engine, then the tranny, and threads into the starter. they are backwards
I can't remember the bolt size (14mm head sounds right), but the thread pitch is 1.25 I believe. They are a metric bolt, obviously.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM