On my way to painting
#76
Got Rotors?
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Statesville, NC
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
the intake i made my self on a 3axis CNC and also made the water temp sensor manifold.
I did paint over the POR15 were i had too, like the lower valance panels and the little bit on the bumpers. I sprayed my primer 2 coats and then 2 coats of color and 2 coats of clear. By the 2nd coat of primer it was not noticeable. but the paint does not adhere all that great on the POR 15, from my experiences i would avoid it if all possible.
I did paint over the POR15 were i had too, like the lower valance panels and the little bit on the bumpers. I sprayed my primer 2 coats and then 2 coats of color and 2 coats of clear. By the 2nd coat of primer it was not noticeable. but the paint does not adhere all that great on the POR 15, from my experiences i would avoid it if all possible.