my new dash
Thread Starter
Senior Member
Joined: Apr 2003
Posts: 601
Likes: 0
From: Winnipeg MB
nope...no radio, no speakers, no amps, no rear storage bins, no rats nest, no air pump, no sound insulation...no stock seats (miata seats in her now)
all those this slow you down.
all those this slow you down.
Trending Topics
Thread Starter
Senior Member
Joined: Apr 2003
Posts: 601
Likes: 0
From: Winnipeg MB
do you want the start button? do you want the cig lighter? tell me exactly what you would like and ill give you a price...also do you want me to modify yours or would you like me to modify one of my extras?
brilliantly stupid
Joined: Nov 2002
Posts: 1,100
Likes: 0
From: Rockford, IL
No start button, although that would be pretty damn cool to have. Cig lighter would be nice, but right now I have mine disconnected and I've put an RX-7 emblem over the hole, which adds a nice touch. I could probably just send you mine. If you have that cubby hole thing, that'd be nice to have there, but otherwise if not....just leave it closed off.
Thread Starter
Senior Member
Joined: Apr 2003
Posts: 601
Likes: 0
From: Winnipeg MB
so....opening for the stereo...cubbyhole...but seal up the cig lighter...what about the clock opening? and i can make you a start button you can hook up for not too much money.
I would do it for $60.00...add another $85.00 for the start button unit installed...(which i would set up so you could install it in 20 minutes)
so thats $60.00 for the dash unit...and $145.00 for the dash and button kit.
I would do it for $60.00...add another $85.00 for the start button unit installed...(which i would set up so you could install it in 20 minutes)
so thats $60.00 for the dash unit...and $145.00 for the dash and button kit.
brilliantly stupid
Joined: Nov 2002
Posts: 1,100
Likes: 0
From: Rockford, IL
Well, I'd like the opening for the cig lighter for just in case I do hook it back up. Clock opening would be nice to have. I dunno if I'd have the money for the start button kit and I dunno if I'd be up to installing it as I am not sure what's involved with all that. Unless you'd like to tell us all how you did it. So, 60 is something I can pull off, but 145 is really pushing it. heh
Thread Starter
Senior Member
Joined: Apr 2003
Posts: 601
Likes: 0
From: Winnipeg MB
instalation is simple...its a matter of disconnecting 3 wires from your ignition...and attaching them to the relay I'll supply...
so what you would like is for me to give you a dash which is prepared like mine, but with all of the stock openings?
so what you would like is for me to give you a dash which is prepared like mine, but with all of the stock openings?
Thread
Thread Starter
Forum
Replies
Last Post
