my new car
#1
rotary newbie
Thread Starter
my new car
well this is what i just bought for 400can a whole lot better then the geo i was driving. but this will be my restoration project floors are rough but body's miney here she is
not a bad deal eh?
especially for the cragger SS rims heheh
not a bad deal eh?
especially for the cragger SS rims heheh
#7
rotary newbie
Thread Starter
she runs rough because she runs it ran out of gas a few days ago so i think it sucked something up or something because she dosn't want to run without the choke on and i already changed the fuel filter and it helped a bit any idea's of what else it could be?? and i like the craggers there different. this is my first rx-7 and ive always wanted one but i knwo nothign of ratary so i could be diggin my own grave lol but anyways thanx for the comments
Trending Topics
#8
rotary newbie
Thread Starter
any the interior is ok except for the drivers seat and the headliner is all cracked to **** whats a good site for aftermarket goodys for these play toys anyways?
#14
rotary newbie
Thread Starter
well mine was ran out of gas and now it runs like shiat like just barely running i already changed the filter.. and there is also a leak in the tank so i was wondering if it has a pressure system inside the tank that would cause this any help to the ratary noob would be great guys
#15
Senior Member
Join Date: Oct 2003
Location: Jonesborough, TN
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
There are two more filters on the banjo bolts which connect to fuel lines to the carb. Pull the bolts and check those filters. They are there to catch smaller stuff that makes it through the main filter. If it has been run out of gas several times a lot of the really small particles may be clogging those small filters and restricting fuel flow. Worth a look anyway.
Good Luck!
Good Luck!
#16
rotary newbie
Thread Starter
so the connections right on the carb? i also read something about a check valve in one of the lines near the carb i dont see this on mine it also looks as if someone put new lines in maybe they didn't put the valve back im not sure any ideas ... also thanx for the help
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM