My car breaks down under load!
#1
Rotary Enthusiast
Thread Starter
My car breaks down under load!
Ok, please give me some ideas on what you might check regarding this problem.
The car is an '82 RX7 which is running a TII engine. It still uses the dizzy and uses a Microtech for fuel.
Anyway, when I rev hard and start making boost with the foot to the floor the car will start spluttering and carrying on at about 5.5k rpm. I can hear backfiring and the car makes no more power after this point.
If I drive a bit easier (less load) but let it go it will reach redline with no problems.
Any ideas?
Thanks in advance.
The car is an '82 RX7 which is running a TII engine. It still uses the dizzy and uses a Microtech for fuel.
Anyway, when I rev hard and start making boost with the foot to the floor the car will start spluttering and carrying on at about 5.5k rpm. I can hear backfiring and the car makes no more power after this point.
If I drive a bit easier (less load) but let it go it will reach redline with no problems.
Any ideas?
Thanks in advance.
#3
Rotary Enthusiast
Thread Starter
I'm really beginning to wonder myself about this. I'll have to check to see if it's locked (never done that before) and if it isn't get it done.
The dissy is the stock 12A one, so it needs to be locked AFAIK.
The dissy is the stock 12A one, so it needs to be locked AFAIK.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
08-11-15 10:30 PM