msd 6al vs. streetfire 5520 ignition
#1
Junior Member
Thread Starter
Join Date: Feb 2008
Location: Planet errrfffff via Ga.
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
msd 6al vs. streetfire 5520 ignition
I wanted to see if anyone has any info regarding the streetfire setup. I looked at the specs and there about the same. This is somewhat cheaper to buy than the 6al box. I havent done my research about changing over just yet. Just heard that it does wonders for the ignition. My question with this in mind do you need one or two boxes for this to be done completely.
#2
i'm a poser
iTrader: (1)
Join Date: Apr 2006
Location: san leandro, Ca
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
to do it completely? you can use 1 or you can use 3. i have 1 streetfire, its wonderful. it sits on my afm. does it help much? depends on how bad your current ignition system is.
#3
yessir
iTrader: (24)
Join Date: May 2005
Location: Sebring FL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
MSD 6A is cheaper than the 6AL. It's the same thing as the 6AL, with no limiter.
Also, with only one box you can only limit the leadings with the 6AL. So you might as well just get the 6A or three 6AL's to you use the limiter properly.
Also, with only one box you can only limit the leadings with the 6AL. So you might as well just get the 6A or three 6AL's to you use the limiter properly.
#6
The Shadetree Project
iTrader: (40)
well kinda. read this whole thread and make a more informed decision. I run Mallory VI-A now because it's as good as the D6+ and it's cheaper than a MSD 6A..
https://www.rx7club.com/showthread.p...hlight=digital
there a few links read through those as well and make an imformed decision.
I researched my *** off so you won't have too.
https://www.rx7club.com/showthread.p...hlight=digital
there a few links read through those as well and make an imformed decision.
I researched my *** off so you won't have too.
#7
Junior Member
Thread Starter
Join Date: Feb 2008
Location: Planet errrfffff via Ga.
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
well kinda. read this whole thread and make a more informed decision. I run Mallory VI-A now because it's as good as the D6+ and it's cheaper than a MSD 6A..
https://www.rx7club.com/showthread.p...hlight=digital
there a few links read through those as well and make an imformed decision.
I researched my *** off so you won't have too.
https://www.rx7club.com/showthread.p...hlight=digital
there a few links read through those as well and make an imformed decision.
I researched my *** off so you won't have too.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM