msd 6al vs. streetfire 5520 ignition
 

I wanted to see if anyone has any info regarding the streetfire setup. I looked at the specs and there about the same. This is somewhat cheaper to buy than the 6al box. I havent done my research about changing over just yet. Just heard that it does wonders for the ignition. My question with this in mind do you need one or two boxes for this to be done completely.

to do it completely? you can use 1 or you can use 3. i have 1 streetfire, its wonderful. it sits on my afm. does it help much? depends on how bad your current ignition system is.

MSD 6A is cheaper than the 6AL. It's the same thing as the 6AL, with no limiter.

Also, with only one box you can only limit the leadings with the 6AL. So you might as well just get the 6A or three 6AL's to you use the limiter properly.

or run 2, 1 leading with 2gldfs w/e and 1 trailing using stock cap and rotor

will it make much of a difference if one fires more than the other. 6al fires @ 110 and streetfire fires at 95 jules..

well kinda. read this whole thread and make a more informed decision. I run Mallory VI-A now because it's as good as the D6+ and it's cheaper than a MSD 6A..

https://www.rx7club.com/showthread.p...hlight=digital

there a few links read through those as well and make an imformed decision.
I researched my ass off so you won't have too.

Thanks for the info.. Ill check it out and go from there.

No problem. That's over a year of research all in one thread. Really archive material IMHO. lol

i got mine, street fire, on sale with no sales tax. if i had known of the mallory, i probably would have gone that route.