mixturre and idle screws???
#1
recycled teenager
Thread Starter
Join Date: Feb 2004
Location: Jackson MI USA
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
mixturre and idle screws???
Stock 85 RX7 GS Where in heck is the idle adjust screw, I found the mixture screw, but the other screw is not where the fsm says to look. I know I am old but darn!!!. Bob
#2
Once a Marine.....
iTrader: (26)
Ha-ha Bob....that one got me too! Even with the proper amount of light and a long standard tip screw driver, it's still hard to find.....Keep looking, it's there, between the mixture screw and the throttle linkage. Lots of light and a strong pair of "cheater" reading glasses help to.
Good Luck
Good Luck
#4
Tucson Rotary
iTrader: (1)
Join Date: Nov 2003
Location: Tucson
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Bob.
Yes it is a bear to find, like me more light, more glasses. Long thin screw driver. For myself I have a trained screw driver, it now locates that thing pretty much. You really should not have to play with it too much though, unless someone else has or the spring has lost its tension.
If the idle is that far off check for vac leaks. Shutter valve first, any of the choke diaphrams. And check that big hose that goes down to the manifold, firewall side, on the other side of the carb shown. They have a tendency to collapse and crack.
Yes it is a bear to find, like me more light, more glasses. Long thin screw driver. For myself I have a trained screw driver, it now locates that thing pretty much. You really should not have to play with it too much though, unless someone else has or the spring has lost its tension.
If the idle is that far off check for vac leaks. Shutter valve first, any of the choke diaphrams. And check that big hose that goes down to the manifold, firewall side, on the other side of the carb shown. They have a tendency to collapse and crack.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
09-10-15 01:33 PM