megan racing manifold
01-17-12, 04:56 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Burlington, Ontario
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
megan racing manifold
I was wondering if anyone has used the Megan Racing SS manifold on their FB?
http://www.himni-racing.com/index.ph...oducts_id=1373
I would like any info to see if it can work on my RX7 without any issues, I am also going to be running a BW S366 turbo.
Any info will be greatly appreciated.
http://www.himni-racing.com/index.ph...oducts_id=1373
I would like any info to see if it can work on my RX7 without any issues, I am also going to be running a BW S366 turbo.
Any info will be greatly appreciated.
01-17-12, 06:47 PM
#2
Waffles - hmmm good
iTrader: (1)
Its probably for a 13B, so if you have a 84-85 GSL-SE it might work. Otherwise it
won't fit a 12A I'm pretty sure. I looked at the site and that shows up under the FD
listings.
won't fit a 12A I'm pretty sure. I looked at the site and that shows up under the FD
listings.
01-17-12, 07:21 PM
#3
Rotary Enthusiast
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Burlington, Ontario
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
I looked up the site as well, I was just reading up on "twinkletoes" build and noticed he used the manifold. I just need to know how the fitment of the turbo would be.
01-18-12, 04:19 AM
#5
Here are some pics I took real quick. As you can see the hotside of the turbo is going to be either really close or hitting lower intake manifold. My old to4b did. Im thinking this time around what i'll do is cut the manifold flange off, weld on the same guage stainless steel piping to lengthen it further from the lim and weld back on flange.
