1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Mechanical Secondaries, Nikki.

Thread Tools
 
Search this Thread
 
Old Dec 7, 2011 | 06:47 AM
  #26  
Touring's Avatar
Senior Member
iTrader: (1)
 
Joined: Oct 2011
Posts: 320
Likes: 0
From: Florida
That looks good. is it hard to disasemble the carb to that point?
Reply
Old Dec 15, 2011 | 01:35 PM
  #27  
snowbreaker's Avatar
now 17 with 2 cars **)
iTrader: (1)
 
Joined: Apr 2011
Posts: 262
Likes: 1
From: grand rapids, michigan
Originally Posted by Oneiros
The earlier the secondaries open the more bottom end torque you will get. When I experimented with secondaries opening around 10% throttle it was pulling hard at very low rpm as soon as they open. This has been confirmed by someone I spoke to about this, but they said in their experience the fuel economy almost doubled with this setup. ATM I modify the linkage arm and redrill the hole to get secondaries opening around 1/3 to 1/2 throttle.
i have a question regarding that statment, you said you get double fuel economy doing the secondary mech mod?
cause i thought with the secondarys opening up sooner the more gas gets dumped in the carb so your gas mileage goes down.
also what is the gas mileage that this guy with the modded carb is getting?
and before the mod?

sorry if i repeat somebody else or whatever just trying to get things straight in my mind
thanks
Reply
Old Dec 15, 2011 | 02:24 PM
  #28  
one320fc's Avatar
Apex Whore
Tenured Member 05 Years
 
Joined: Mar 2007
Posts: 273
Likes: 0
From: VA
Have I over looked a "how to" thread on this topic? I just orderd a rebuild kit for my nikki and im looking to mod it the most I can for better use. Seems like all the old threads with how to's on stripping and other mods have lost picture hosting.
Reply
Old Dec 16, 2011 | 12:45 AM
  #29  
Oneiros's Avatar
Senior Member
 
Joined: Nov 2009
Posts: 346
Likes: 2
From: Australia
Originally Posted by snowbreaker
i have a question regarding that statment, you said you get double fuel economy doing the secondary mech mod?
cause i thought with the secondarys opening up sooner the more gas gets dumped in the carb so your gas mileage goes down.
also what is the gas mileage that this guy with the modded carb is getting?
and before the mod?

sorry if i repeat somebody else or whatever just trying to get things straight in my mind
thanks
That was referring to a special secondary mod that gets all throttles opening together. I have fuel figures in metric

12L/100km using normal mech secondaries
20L/100km using secondaries that open together with primaries
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM




All times are GMT -5. The time now is 10:43 AM.