I'm missing the front sway bar endlink bolts, washers, spacers, and nuts. I see that Mazdatrix sells this stuff, but I'm not sure how much of each I'll need and how to put them together with my new RB sway bar. Could someone please guide me in the right direction and also maybe have pictures of how to put the bushings, bolts, washers, spacers, etc. together.

Mazdatrix page:
http://www.mazdatrix.com/h6_79-85.htm

Thanks!

 

Bump

 

You can order the sway bar end links from any parts store, or if you want performance check out p-s-t.com for graphite impregnated urethane. Assembly is simple, just look at how the other side is, or even the rear bar. Or you could check out the factory service manual located in the FAQ section.

 

The End Link bolt’s install up through the lower control arm and through the swaybar; with that in mind the order of assembly is:
Bolt
Spacer/Washer
Bushing
Lower control arm
Bushing
Spacer/Washer
Sleeve
Spacer/Washer
Bushing
Swaybar
Bushing
Spacer/Washer
Locknut(s)
Seeing you’re ordering new end links anyway, get the longer bolts, it makes installation a bit easier.

 

check your salvage yard if not autozone sells them complete w/ polyurethane bushings