1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Leaky dellorto

Thread Tools
 
Search this Thread
 
Old Jun 8, 2007 | 02:01 PM
  #1  
fde2blk's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 30
Likes: 0
From: Maine
Leaky dellorto

My DHLA 48 Dellorto is leaking through the choke and I can't seem to figure out why...

My best guess is due to wear on the needle and/or seat, but I'm not sure if that is it. I am pretty sure that it is backfeeding through the starter jet, and out those little ports. It only seems to do it when you come off the throttle too. I'll rev the car, then it will come back down to idle, and the little bowl will fill with fuel, and pour out. Anyone have any ideas?
Reply
Old Jun 8, 2007 | 08:57 PM
  #2  
broke7's Avatar
Banned. I got OWNED!!!
iTrader: (1)
 
Joined: Sep 2005
Posts: 375
Likes: 2
From: georgetown in
check your fuel pressure 4.5 psi max and use a good gauge
Reply
Old Jun 9, 2007 | 11:22 AM
  #3  
fde2blk's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 30
Likes: 0
From: Maine
That was one of the things that I had tried chasing, but was unsuccessful in solving the problem. I knew there was a possibility that my gauge was inaccurate, so I tried continually turning the pressure down until the car leaned out, and would barely run, so I'm pretty sure fuel pressure isn't the issue... does anyone have any other ideas?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
FC_DREAMS
General Rotary Tech Support
20
Sep 22, 2015 09:43 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM




All times are GMT -5. The time now is 09:25 PM.