Latest Rotaryshack 13Bturbo swap 80rx7
well, maybe they will be temp (1 wk) bans as it usually is the first time, so in a few days they'll be back.
Unjust or not, there was a lot of flaming and cursing, which objectively viewed is inexcusable, and that includes ErnieT, IMHO.
Unjust or not, there was a lot of flaming and cursing, which objectively viewed is inexcusable, and that includes ErnieT, IMHO.
SINCE rob was banned from RX7CLUB.COM.. is there ANY way we can get him back? can WE sign a petition???all he posted was what he did, and what he used.
FYI: Tan's car is the SHIIIIET!!!!!
FYI: Tan's car is the SHIIIIET!!!!!
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Originally posted by cdrad51
well, maybe they will be temp (1 wk) bans as it usually is the first time, so in a few days they'll be back.
Unjust or not, there was a lot of flaming and cursing, which objectively viewed is inexcusable, and that includes ErnieT, IMHO.
well, maybe they will be temp (1 wk) bans as it usually is the first time, so in a few days they'll be back.
Unjust or not, there was a lot of flaming and cursing, which objectively viewed is inexcusable, and that includes ErnieT, IMHO.
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
I've been told rotor housings are being sent today, but the point is I shouldn't have to go to these extremes to get something that was ordered over a year ago. Thats sad....IMO
You might have a point, if your version of the story is accurate, I personally don't know. But I didn't read anything in the rules that licenses you to be "out of line" as you put it, because "you had good reason". As a moderator, it is important that you set the example (again, IMHO).
In any case, glad your issue is resolving.
In any case, glad your issue is resolving.
and the plot thickens. Well, that's ONE way to get product you've paid for. Now how am I gonna get www.batteriesareus.com to cough up that damned Optima battery I already paid for.
Last edited by inittab; Feb 25, 2004 at 05:03 PM.
Ok, now here's something a little off topic. I have a cosmo 13b 4-port, will the exhaust manifold and turbo from that engine fit onto my 13b? I have a pretty similiar setup, the same intake manifold(racing beat) and carbs(weber 45mm). Thanks for any info.
Originally posted by inittab
and the plot thickens. Well, that's ONE way to get product you've paid for. Now how am I gonna get www.batteriesareus.com to cough up that damned Optima battery I already paid for.
and the plot thickens. Well, that's ONE way to get product you've paid for. Now how am I gonna get www.batteriesareus.com to cough up that damned Optima battery I already paid for.
Originally posted by ErnieT
If I was out of line, I had good reason. Taking over a year to deliver goods is not excusable. Some say thats not being a crook. Last time I checked, taking somebody's money and not sending them anything is stealing. IMO...
If I was out of line, I had good reason. Taking over a year to deliver goods is not excusable. Some say thats not being a crook. Last time I checked, taking somebody's money and not sending them anything is stealing. IMO...
Originally posted by ErnieT
I've been told rotor housings are being sent today, but the point is I shouldn't have to go to these extremes to get something that was ordered over a year ago. Thats sad....IMO
I've been told rotor housings are being sent today, but the point is I shouldn't have to go to these extremes to get something that was ordered over a year ago. Thats sad....IMO
Oh and FWIW (not that you care cause you dont own this place, but see fit to use it as your personal playground for YOUR OWN benefit) But some guys will be hesitant to visit or post here from now on for fear of being banned. Well then again, maybe you own stock in nopistons.com, or mazspeed.com. You caused the owners of this site alot of embarrasment and hurt their membership/business and reputation you jackbooted thug.

Your job is to uphold the rules of this forum as set by the owners/admins. Not to abuse the authority granted to you for personal purposes.
Nikki-Modder Rex-Rodder
Joined: Feb 2001
Posts: 2,890
Likes: 14
From: Trying to convince some clown not to put a Holley 600 on his 12a.
Good Gawd I'm glad you said that, Carl.
Ernie, I looked through your posts, and you have only two threads in this section that you've posted on. Ever.
You DO NOT have a bitch-post about Robert in the "Good Guys/Bad Guys" section.
You should be banned for misusing the trust and responsibility given to you. The boys got rowdy, and you didn't deal with it properly. You used your mod ability to punish them for personal reasons.
To think that any of us would find the excuse you used as an exceptable reason to ban them is an insult to our intelligence, and demonstrative of your immaturity.
Ernie, I looked through your posts, and you have only two threads in this section that you've posted on. Ever.
You DO NOT have a bitch-post about Robert in the "Good Guys/Bad Guys" section.
You should be banned for misusing the trust and responsibility given to you. The boys got rowdy, and you didn't deal with it properly. You used your mod ability to punish them for personal reasons.
To think that any of us would find the excuse you used as an exceptable reason to ban them is an insult to our intelligence, and demonstrative of your immaturity.
Nikki-Modder Rex-Rodder
Joined: Feb 2001
Posts: 2,890
Likes: 14
From: Trying to convince some clown not to put a Holley 600 on his 12a.
Originally posted by slashdawg00110
Can I ban myself? I didn't do something I was supposed to today and then I said a bad word.
Can I ban myself? I didn't do something I was supposed to today and then I said a bad word.
...don't forget to post pictures.
Originally posted by 680RWHP12A
well the stock turbo 2 makes 150 flywheel h/p in stock trim.....(i think)
i have dyno tested the most basic blow-thru system i sell
(stock motor, stock turbo, non intercooled small45 weber) and it mabe 230RWHP, @ 10PSI wich roughly translates to approx....260 to 270 flywheel hp...
not bad for a low budget turbo setup!!!
well the stock turbo 2 makes 150 flywheel h/p in stock trim.....(i think)
i have dyno tested the most basic blow-thru system i sell
(stock motor, stock turbo, non intercooled small45 weber) and it mabe 230RWHP, @ 10PSI wich roughly translates to approx....260 to 270 flywheel hp...
not bad for a low budget turbo setup!!!
The final hp will depend on the engine Robert used , the high compression NA or the low compression turbo. Adding a turbo to the NA gives far more power for a given boost, but real wear on the seals.
Out of interest there is no Jspec 1991 engine, all 1991 engines had the same spec.and were identical. It would be correct to say a secondhand engine imported from Japan from a scrapped car.
Last edited by fitzwarryne; Feb 25, 2004 at 09:35 PM.
Originally posted by RoToReX7
the body work on that car is stock.. cleeeeeeeeeeeeeeeaaaaaaan stock!! rob, we gonna drink tonight? ryan, you coming over too and drinking??
the body work on that car is stock.. cleeeeeeeeeeeeeeeaaaaaaan stock!! rob, we gonna drink tonight? ryan, you coming over too and drinking??
damn got this too late wold have been down too....sup chris!
Originally posted by fitzwarryne
It would be correct to say a secondhand engine imported from Japan from a scrapped car.
It would be correct to say a secondhand engine imported from Japan from a scrapped car.
The answer is NO.........................
Its USED EGINE from JAPAN; not second hand. The term second hand is a used-car lot lingo to make it sound like its hardly used.
Originally posted by ErnieT
I've been told rotor housings are being sent today, but the point is I shouldn't have to go to these extremes to get something that was ordered over a year ago. Thats sad....IMO
I've been told rotor housings are being sent today, but the point is I shouldn't have to go to these extremes to get something that was ordered over a year ago. Thats sad....IMO


