1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Just got an SA. Now what?

Thread Tools
 
Search this Thread
 
Old Sep 19, 2006 | 05:45 PM
  #1  
Enthu's Avatar
Thread Starter
Still has an RX7.
iTrader: (1)
 
Joined: May 2001
Posts: 1,015
Likes: 5
From: minneapolis MN
Just got an SA. Now what?

HI everyone. A while ago I posted in here about my brother picking up a first gen. Well he got it. It sarts up, but the clucth problem is there. Probably a bad TOB since the hydraulics were not to fault. And I can hear a whirring that changed with pressing the clutch pedal. So he's buying a new clutch.

now,my question. I have a wrecked S4 FC. I swapped out the TII seats into the SA already. much nicer than the ragged ones that were in it! But what else can be done to upgrade the car with parts from an S4 FC? I don't want to have to do any real fabbing or modding to swap parts. Just want to know what the easy swaps are.

The '79 SA was an Ice racing car, but the 12a fires right up still. exhaust has an RB header and a nice cat back. It's got a swapped rear end so it has 4 wheels disc brakes. It has Minuni Carb that supposedly was placed on the car 2 years ago.

I did some searching, but didn't see any thing pertaining to my exact question.
Reply
Old Sep 19, 2006 | 05:49 PM
  #2  
83rx7boy92's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: May 2006
Posts: 525
Likes: 1
From: racine wisconsin
why not slap the turbo on it
Reply
Old Sep 19, 2006 | 05:56 PM
  #3  
Enthu's Avatar
Thread Starter
Still has an RX7.
iTrader: (1)
 
Joined: May 2001
Posts: 1,015
Likes: 5
From: minneapolis MN
Originally Posted by 83rx7boy92
why not slap the turbo on it
Good thinking! but that engine that was in it has a new home on my S5 FC! and I meant it has a Mikuni Carb, not Minuni.
Reply
Old Sep 19, 2006 | 06:30 PM
  #4  
trochoid's Avatar
Old Fart Young at Heart
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 8
From: St Joe MO
Upgrade to the S4 alt, get rid of the points, go electronic on the ignition, toss the fusible links, install the 2nd gen fuse block in the bay.
Reply
Old Sep 19, 2006 | 07:01 PM
  #5  
Enthu's Avatar
Thread Starter
Still has an RX7.
iTrader: (1)
 
Joined: May 2001
Posts: 1,015
Likes: 5
From: minneapolis MN
Thanks trochoid. I'll do a search for how to do these.
Reply
Old Sep 19, 2006 | 07:02 PM
  #6  
Enthu's Avatar
Thread Starter
Still has an RX7.
iTrader: (1)
 
Joined: May 2001
Posts: 1,015
Likes: 5
From: minneapolis MN
If you have a link to a how to on any of these that would speed me, I will be ever-so greatful!
Reply
Old Sep 20, 2006 | 12:24 AM
  #7  
trochoid's Avatar
Old Fart Young at Heart
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 8
From: St Joe MO
FAQs and last thread in the archives.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Joe428
1st Generation Specific (1979-1985)
12
Sep 29, 2015 06:58 PM
RCCAZ 1
1st Generation Specific (1979-1985)
5
Aug 11, 2015 07:05 PM
renns
1st Generation Specific (1979-1985)
29
Aug 15, 2008 04:36 PM
gonzz
1st Generation Specific (1979-1985)
10
Jul 14, 2006 10:30 AM
Fire85GSLSE
1st Generation Specific (1979-1985)
17
Jan 12, 2005 03:32 PM




All times are GMT -5. The time now is 02:54 PM.