isc racing muffler?
#1
Full Member
Thread Starter
Join Date: Sep 2004
Location: SC
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
isc racing muffler?
http://www.iscracing.net/exhaust.htm
I'm thinking of getting the isc racing muffler for my '83 project car(see the sig for pics). It is street driven. I don't care if it's loud, just so it sounds ok. I'm sure it won't be any louder than those little ricers(honda's etc.). If not the ISC muffler, which one to get?
Any one have one of these? Experiences? I've done some searching on the board here and didn't find much. They have a 3" mid pipe that should weld right in.
If you look at the pics, you'll see my old exhaust, the glass packs have been long since blown out. They were on the car for at least 15 years, and no packing for 10 of those. The car has basically been running with nothing but a $40 turbo muffler since ~96. I have joined the header outlet into one 3" pipe and put a moroso spiral flow right after the header.
I hope to get the engine dropped in this weekend
thanks
I'm thinking of getting the isc racing muffler for my '83 project car(see the sig for pics). It is street driven. I don't care if it's loud, just so it sounds ok. I'm sure it won't be any louder than those little ricers(honda's etc.). If not the ISC muffler, which one to get?
Any one have one of these? Experiences? I've done some searching on the board here and didn't find much. They have a 3" mid pipe that should weld right in.
If you look at the pics, you'll see my old exhaust, the glass packs have been long since blown out. They were on the car for at least 15 years, and no packing for 10 of those. The car has basically been running with nothing but a $40 turbo muffler since ~96. I have joined the header outlet into one 3" pipe and put a moroso spiral flow right after the header.
I hope to get the engine dropped in this weekend
thanks
#2
Burning Oil-Grinding 3rd
They build race cars so I bet it would work well.
I had an elchepo on my 79 SP for a bit and it was so loud it gave me a headach. I changed it out to an RB and have been very Happy.
I had an elchepo on my 79 SP for a bit and it was so loud it gave me a headach. I changed it out to an RB and have been very Happy.
#3
Airflow is my life
Its a Dynomax 3" in and out straight thru muffler. I bought one from Summit. Its on my racecar. Its too loud for the streets. I did buy his mandrel bent pipe. Its ok, but I had to cut it and change a couple of the angles. I also bought the center collector with the presilencer. For a racecar its fine, but too loud for the streets.
#4
Banned. I got OWNED!!!
Originally Posted by Hades12
They build race cars so I bet it would work well.
With that said, any straight through pipe will be too loud for the street.
Last edited by Rx7carl; 01-27-05 at 08:59 PM.
#5
Full Member
Thread Starter
Join Date: Sep 2004
Location: SC
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
It's really difficult to find a muffler that everyone agrees is good for the rotaries. I think I'll go with the magnaflow 5x8 oval 3" o/c ( # 14251) for now. Then I can go louder with the ISC later ;-)
#6
My wife bought me 2 RX-7s
Join Date: Aug 2001
Location: Saskatoon, Saskatchewan, Canada
Posts: 2,328
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by g17-jimmy
It's really difficult to find a muffler that everyone agrees is good for the rotaries. I think I'll go with the magnaflow 5x8 oval 3" o/c ( # 14251) for now. Then I can go louder with the ISC later ;-)
http://members.shaw.ca/deuteronomy/DSCF0105.WAV
http://members.shaw.ca/deuteronomy/DSCF0059.AVI
That's admittedly with only one presilencer, but the other one doesn't quiet it down THAT much. I think I melted the packing actually, cause it was quiet for about three days there when I first installed it.
Trending Topics
#8
Originally Posted by g17-jimmy
It's really difficult to find a muffler that everyone agrees is good for the rotaries. I think I'll go with the magnaflow 5x8 oval 3" o/c ( # 14251) for now. Then I can go louder with the ISC later ;-)
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM