Interesting wiper issue
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: oregon
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Interesting wiper issue
I can't be the only one whose had this problem, and since we don't have wiper relays.....
Anyhow, if i use my windshield wipers on the first speed, they go up about 3 inches and stop, and wont go any further.
The medium speed and max speed work fine, spray/clean mode works, and manual one time wipe works (where you push it back)
also, and i don't know if this is normal - if i turn the wipers off at any time they just stop right there, and don't return to their home position. is this normal?
Anyhow, if i use my windshield wipers on the first speed, they go up about 3 inches and stop, and wont go any further.
The medium speed and max speed work fine, spray/clean mode works, and manual one time wipe works (where you push it back)
also, and i don't know if this is normal - if i turn the wipers off at any time they just stop right there, and don't return to their home position. is this normal?
#2
Round and Round
iTrader: (10)
Sounds like your intermitent function is not working properly. It is controlled by the CPU. Low and High speed is direct from the switch. I believe the return to rest function is controlled by the CPU also. CPU is located under the dash against the left kick panel. The FSM has info about it in Chapter 15 Body Electrical.
#5
Round and Round
iTrader: (10)
Factory Service Manuals, Wiring diagrams and other interesting literature can be downloaded from either of these sites.
http://foxed.ca/foxed/index.php?page=rx7manual
http://wright-here.net/cars/rx7/manuals.html
http://foxed.ca/foxed/index.php?page=rx7manual
http://wright-here.net/cars/rx7/manuals.html
Thread
Thread Starter
Forum
Replies
Last Post