1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Idle problem

Thread Tools
 
Search this Thread
 
Old Nov 30, 2009 | 08:44 PM
  #1  
docholiday's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
 
Joined: Sep 2004
Posts: 277
Likes: 1
From: Vancouver
Idle problem

alright here's the problem. i have an 83 rx7 with a stock 12a in it. all is stock on the motor except exhaust. the car runs and drives perfectly...its just when i come to a stop the idle drops down super low. the engine is still strong so it manages to keep idle...but we're talking way below regular idle of 750. maybe like 400 or something. it stumbles like its about to die but it doesnt. it picks itself back up and then bumps up to about 1000rpm. then falls back down to about 400-500 for a few seconds, then back up to 1000rpm. and repeats itself. it also has trouble when i go from high revs down to idle it just dies. i was free revving it in the garage and everything was smooth but when i let it fall back to idle it just died. any thoughts, ideas? thanks.

dave
Reply
Old Nov 30, 2009 | 11:42 PM
  #2  
docholiday's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
 
Joined: Sep 2004
Posts: 277
Likes: 1
From: Vancouver
i think i have fixed the problem. its seems to be idling a bit high now but we'll see. i replaced ignitors, cap, rotor, plugs and alternator (just cuz i had one with a dual sheave pulley on it laying around).
Reply
Old Nov 30, 2009 | 11:44 PM
  #3  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
A bit high is way better than too low. Now, look up the carb adjustment procedure, and you can fine it down perfect.
Reply
Old Dec 1, 2009 | 12:07 AM
  #4  
Kentetsu's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Jun 2004
Posts: 11,359
Likes: 14
From: Grand Rapids Michigan
Sterling did an excellent writeup on the procedure to tune the idle. Check it out:

http://sterlingmetalworks.com/tuning_the_nikki.htm

Good luck.




.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 12:37 AM.