I need to sell some things...
Thread Starter
Rollin' coal and 53mpg!
Joined: Oct 2002
Posts: 1,126
Likes: 0
From: Jacksonville, Floriduh
I need to sell some things...
uber-rare set of 15x7 Centerline IMSA wheels (1 of 7 EVER produced in the 4x110mm bolt pattern) $1800
13B 4port from a 76 Cosmo - $500
Weber 48IDA Downdraft carb, Racing Beat manifold for 13B 4port - $650
1982 GSL 5spd Tranny, new clutch master cylinder, clutch slave cylinder - $300
1983 GSL rearend (LSD + Discs) - $250
1982 GSL brown seats - $100 for the pair
1979 gauge cluster (120mph speedo) and bezel - $20
1983 gauge cluster and bezel - $20
1980 gauge cluster (85mph speedo) and bezel- $20
BARELY USED Racing Beat Streetport exhaust system for 13B in a 79-80 chassis, not GSL-SE - $500
I have LOTS of other parts.... let me know what you need.
13B 4port from a 76 Cosmo - $500
Weber 48IDA Downdraft carb, Racing Beat manifold for 13B 4port - $650
1982 GSL 5spd Tranny, new clutch master cylinder, clutch slave cylinder - $300
1983 GSL rearend (LSD + Discs) - $250
1982 GSL brown seats - $100 for the pair
1979 gauge cluster (120mph speedo) and bezel - $20
1983 gauge cluster and bezel - $20
1980 gauge cluster (85mph speedo) and bezel- $20
BARELY USED Racing Beat Streetport exhaust system for 13B in a 79-80 chassis, not GSL-SE - $500
I have LOTS of other parts.... let me know what you need.
.
Oh ****, sorry man 
. I didnt mean it like that dude, honest. You just said to let you know what I might need, it was 3 AM when I posted, I didnt even think about it, I really am sorry man . I was just trying to think of something I need for my car, cause the front of my car is kinda screwed too. Ahh, I feel like an ***, Im so sorry ...
~T.J.
. I didnt mean it like that dude, honest. You just said to let you know what I might need, it was 3 AM when I posted, I didnt even think about it, I really am sorry man . I was just trying to think of something I need for my car, cause the front of my car is kinda screwed too. Ahh, I feel like an ***, Im so sorry ...~T.J.
Trending Topics
Prosthetic head.
Joined: Apr 2003
Posts: 1,079
Likes: 0
From: Pennsylvania
Is your hood wasted? It looks that way. Other than that, it seems that your front-end problem could be fixed with some good ol' fiberglassing. Good luck, and try to keep your for-sales in the for-sale section.
Last edited by excitingleopard; Jul 13, 2003 at 10:49 PM.
Thread Starter
Rollin' coal and 53mpg!
Joined: Oct 2002
Posts: 1,126
Likes: 0
From: Jacksonville, Floriduh
Are you gonna shift?!
Joined: Dec 2002
Posts: 602
Likes: 0
From: Rochester, NY
Originally posted by CHEF_EG_1
The whale tail and rear fenders are molded into the body. Nothing is detachable without cracking the hell out of it.
The whale tail and rear fenders are molded into the body. Nothing is detachable without cracking the hell out of it.
You know that you have the exact same block and carb that I do. If I had the money I'd buy everything in a heartbeat and use the NA motor for when I rebuild mine. Everything would bolt up in my engine bay perfectly. Damn I need some cash. Lemme know if you ever decide to change your mind about the tail. I'm sure there has got to be some way to remove it without cracking it. Good luck with the ebay stuff and I hope to see a 20B in your car asap!
Thread Starter
Rollin' coal and 53mpg!
Joined: Oct 2002
Posts: 1,126
Likes: 0
From: Jacksonville, Floriduh
Originally posted by AdrenalifeRX7
Don't give me that. I have been looking for that spoiler forever. Just tell me that you are swapping in a 20B and you want to keep the widebody and tail. You know that you have the exact same block and carb that I do. If I had the money I'd buy everything in a heartbeat and use the NA motor for when I rebuild mine. Everything would bolt up in my engine bay perfectly. Damn I need some cash. Lemme know if you ever decide to change your mind about the tail. I'm sure there has got to be some way to remove it without cracking it. Good luck with the ebay stuff and I hope to see a 20B in your car asap!
Don't give me that. I have been looking for that spoiler forever. Just tell me that you are swapping in a 20B and you want to keep the widebody and tail.
You know that you have the exact same block and carb that I do. If I had the money I'd buy everything in a heartbeat and use the NA motor for when I rebuild mine. Everything would bolt up in my engine bay perfectly. Damn I need some cash. Lemme know if you ever decide to change your mind about the tail. I'm sure there has got to be some way to remove it without cracking it. Good luck with the ebay stuff and I hope to see a 20B in your car asap!
I'll sell you the engine, carbs, and exhaust for 2200.
edit: and I'm swapping in a 20B, and keeping the widebody and whaletail.