3rdgen TII swap into 1stgen
#2
Dorifto Tengoku No More
Join Date: Nov 2002
Location: On the mountain of Thessaloniki, Greece
Posts: 1,331
Likes: 0
Received 0 Likes
on
0 Posts
#3
HEAVY METAL THUNDER
Join Date: Oct 2002
Location: Elsenborn, Belgian Eifel
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
Fanis, AJC-13B has a cosmo engine, which is close, but it's not a 3rd gen one!
Nevertheless, it'd be a better choice because it's simular, yet cheaper.
Also done by some else on the forum before, believe Mike is his name.
Hardest part? Getting it to run. Basicly dropping it in wouldn't require that much work. You'd need a flywheel and gearbox that fits the engine and the car. TII is best option, but requires some work to get it into the car. Basicly you could use a FB tranny, but I don't think it's gonna last long...
Problem would be the ECU. Aftermarket would be best idea.
Remember: you'll need a custom exhaust, an aftermarket ECU, some fabrication work, a lot of tuning work... It's gonna cost BIG $$$. If you have the money and time, and courage, yes it can be done. Just think about it, as you really have to be able to afford such a swap. And the whole thing will probable cost you near the price of an FD anyway...
Nevertheless, it'd be a better choice because it's simular, yet cheaper.
Also done by some else on the forum before, believe Mike is his name.
Hardest part? Getting it to run. Basicly dropping it in wouldn't require that much work. You'd need a flywheel and gearbox that fits the engine and the car. TII is best option, but requires some work to get it into the car. Basicly you could use a FB tranny, but I don't think it's gonna last long...
Problem would be the ECU. Aftermarket would be best idea.
Remember: you'll need a custom exhaust, an aftermarket ECU, some fabrication work, a lot of tuning work... It's gonna cost BIG $$$. If you have the money and time, and courage, yes it can be done. Just think about it, as you really have to be able to afford such a swap. And the whole thing will probable cost you near the price of an FD anyway...
#6
The AUTO DOCTOR
Join Date: Mar 2001
Location: South Side of ATL. Ga.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
well theres also a local fb with a 3rd gen motor in it and a cartech kit... its FAST and ajc13b SOLD his car.... boooooooo but there is a fast *** jc based fb in aussy some place
Trending Topics
#11
The Rotorheaded Geek
iTrader: (1)
Join Date: Mar 2002
Location: exit 8 in Manchester, NH
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
I am putting a 96 cosmo engine in, using a TII tranny and a Haltech computer. So far things have gone kinda smooth, ended up having to rebuild the engine, now I am just doing final clean up, should be looking at mounting it soon.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM