1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

I need around $800...i'm still parting my car and have practically the whole car.

Old Sep 14, 2003 | 04:38 AM
  #1  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
I need around $800...i'm still parting my car and have practically the whole car.

So far i've made $7 off my car, i despirately need more money, i just found a new car to buy and need to grab it before it's gone. I really don't want to have to sell my leather seats or whatever else i have, i want to put that into whatever new car i get, but if i have to, i will. I want $300 for the seats and probably around $75 for shipping of them. Seats are in excellent conditon, no rips, tears or anything of the sort, brown leather. i've got tinted windows all the way around and a partially tinted front windshield if anyone needs replacement glass, i'll give a price on that if anyone is interested in certain sections. Full exhaust for sale, although the cat-back utilizes the stock exhaust flange, i have a mid pipe, header, muffler, ect. We can negotiate a price. My stock suspension on the car is in excellent shape, struts springs, ect, i've got the full rear end, sway bars, every suspension component to upgrade your's. Rear end is for sale, but would more than likely need to be picked up, like i said, i need to get rid of these parts, but not for too much less than their value.
Reply
Old Sep 14, 2003 | 09:37 AM
  #2  
Mr BiG G's Avatar
I'll Apex YOUR Seal
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 972
Likes: 0
From: Mississauga, Ontario - Canada
can u send me prices for the suspension parts and for the exhaust components
Reply
Old Sep 14, 2003 | 04:38 PM
  #3  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
Check your PMs Mr BIG G. We can negotiate a price though, for the full exhaust, i'd like $450 excluding shipping for the exhaust, it includes all gaskets, an aftermarket header to block gasket $50 in itself $200 header, $50 midpipe, $20 header to midpipe adaptor, $100 cat-back and $100 muffler, gaskets are hardware are around $10. The exhaust was only used for about 3 months, so it's all in excellent shape.
Reply
Old Sep 14, 2003 | 11:53 PM
  #4  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
I forgot to add, my car was an '85 GSL-SE.
Reply
Old Sep 15, 2003 | 12:10 AM
  #5  
natew's Avatar
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Mar 2003
Posts: 328
Likes: 0
From: CA
What color int. and ext?
Reply
Old Sep 15, 2003 | 01:03 AM
  #6  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
Interior is brown leather, exterior is... primered white, body is in too bad of shape to really give anything away, but i can sell the headlight assemblies, header panel, hood, and maybe a few other pieces that are dent-free.
Reply
Old Sep 15, 2003 | 01:03 AM
  #7  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
.
Reply
Old Sep 15, 2003 | 06:59 AM
  #8  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
. -HUMM -SE WASNT IT?

Last edited by MIKE-P-28; Sep 15, 2003 at 07:04 AM.
Reply
Old Sep 15, 2003 | 07:01 AM
  #9  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
Re: I need around $800...i'm still parting my car and have practically the whole car.

Originally posted by O 16581 72452 5
So far i've made $7 off my car, i despirately need more money, i just found a new car to buy and need to grab it before it's gone. I really don't want to have to sell my leather seats or whatever else i have, i want to put that into whatever new car i get, but if i have to, i will. I want $300 for the seats and probably around $75 for shipping of them. Seats are in excellent conditon, no rips, tears or anything of the sort, brown leather. i've got tinted windows all the way around and a partially tinted front windshield if anyone needs replacement glass, i'll give a price on that if anyone is interested in certain sections. Full exhaust for sale, although the cat-back utilizes the stock exhaust flange, i have a mid pipe, header, muffler, ect. We can negotiate a price. My stock suspension on the car is in excellent shape, struts springs, ect, i've got the full rear end, sway bars, every suspension component to upgrade your's. Rear end is for sale, but would more than likely need to be picked up, like i said, i need to get rid of these parts, but not for too much less than their value.
humm now im thinking, terre haute is what 80 miles from toyota??? im in princeton everyday, since i work there

What do you want for the front susp and the rear susp?

I could drive to get it.
Reply
Old Sep 15, 2003 | 07:03 AM
  #10  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
damn SLOW forum, double post
Reply
Old Sep 15, 2003 | 03:54 PM
  #11  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
What all suspension components would you like? Do you want to include the rear end as suspension? rear brake calipers cannot be included, but that's all. I'm going to say $450 for everything that's suspension related, springs, struts, sway bars, control arms, rear end, hubs, brakes, ect.
Reply
Old Sep 15, 2003 | 04:50 PM
  #12  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
Yeah I want it all, but $450 is a bit steep. I can get a whole rolling chassis SE for $300. I just dont need another full car here.

Didnt you have something wrong with the diff before. Like the clutches are something was wore out? If thats the case then Id have to rebuild it or swap in my old GSL diff. In either case its worth less.
Reply
Old Sep 15, 2003 | 05:09 PM
  #13  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
It was only in hard cornering that the rear end would kick out. I was doing donuts and watched a video of it and saw that only the inside wheel was spinning. I later had someone watch me brake torque it to see if both wheels spun and he said they did, it left two even tire marks. Give me a price of what you'd like to pay for it, i was just shooting a number. Basically i was saying to bring extra money incase maybe you saw some extra parts you wanted while you were here.

Last edited by O 16581 72452 5; Sep 15, 2003 at 05:15 PM.
Reply
Old Sep 15, 2003 | 05:46 PM
  #14  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
depending on the condition, id pay $200 - $300 cash.. gotta remember Ill put about 300 hp to it, so I dont want one thats screwed up

I have the cash and I dont jerk chains... Id have to be a weekend when i came and got it. You have a place where the strip down could be enclosed in case of rain?

Also you know once you pull the entire susp, the car is stuck where you pull it. When you have the shell towed off, the junkyard guy wont have a problem, he can just wench whats left up on a flatbed, but you'll have to remember theres no pushing it around to where you need it.

BTW: on the motor and trans Id put it up on ebay. I see people on there selling Se 13's and getting good money for them, even the trans pays a premo price... Dont really worry about shipping, cause www.con-way.com is the cheapest shipper I found. Usually $200 to ship a motor, and UPS will ship a trans, its like $75

Last edited by MIKE-P-28; Sep 15, 2003 at 05:49 PM.
Reply
Old Sep 15, 2003 | 10:27 PM
  #15  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
Thanks for the advice on the motor and tranny, the car is enclosed in a garage so that's not a problem. I guess $300 will be fine, I'm not sure if you want all the front suspension components too?
Reply
Old Sep 15, 2003 | 11:07 PM
  #16  
RotorMotorDriver's Avatar
Seven Is Coming
Tenured Member 20 Years
iTrader: (1)
 
Joined: Dec 2001
Posts: 6,503
Likes: 4
From: Washington
Im thinking he wants everything to convert his car to the -SE suspension.

~T.J.
Reply
Old Sep 16, 2003 | 04:41 AM
  #17  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
Originally posted by O 16581 72452 5
Thanks for the advice on the motor and tranny, the car is enclosed in a garage so that's not a problem. I guess $300 will be fine, I'm not sure if you want all the front suspension components too?
RMD is right, thats what I need, although the rear isnt super important at this time, I MAY go with a Ford 9 at some point. But not at this time, so yeah Ill justswap all of it.

I just got to thinking this car was hit in an accident right? Where exactly was it hit? You got any pictures of this stuff?

Oh and I know you had aftermarket wheels on there, I dont nee those, but do you have the factory ones?

Last edited by MIKE-P-28; Sep 16, 2003 at 04:47 AM.
Reply
Old Sep 16, 2003 | 04:50 AM
  #18  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
It was hit on the passenger side inbetween the rear wheel well and driver's side taillamp, it did not harm the suspension in any way, just left a nasty dent.
Reply
Old Sep 16, 2003 | 04:52 AM
  #19  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
I do have the stock wheels on good tires, i'd like an extra $200 or so for those if possible.

Last edited by O 16581 72452 5; Sep 16, 2003 at 04:55 AM.
Reply
Old Sep 16, 2003 | 07:05 AM
  #20  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
Originally posted by O 16581 72452 5
I do have the stock wheels on good tires, i'd like an extra $200 or so for those if possible.
I might just throw a pass on the wheels, I could just apply $200 towards some 16's or something. You have a PM, we can work out the personal details there.
Reply
Old Sep 16, 2003 | 07:10 AM
  #21  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
I also have a set of 16" wheels i could sell you for $250 without tires if you're interested.
Reply
Old Sep 16, 2003 | 07:13 AM
  #22  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
Originally posted by O 16581 72452 5
I also have a set of 16" wheels i could sell you for $250 without tires if you're interested.
Im looking at 16X10's, how wide are the ones you have?
Reply
Old Sep 16, 2003 | 07:19 AM
  #23  
O 16581 72452 5's Avatar
Thread Starter
The infamous number guy!
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 1,953
Likes: 0
From: Terre Haute, IN.
They're only 16 x 7, i'm not sure the offset, but i'm guessing it's a +35.



Probably not what you're looking for, but there's a picture. You have a PM by the way.
Reply
Old Sep 16, 2003 | 10:02 AM
  #24  
MIKE-P-28's Avatar
Driven a turbo FB lately?
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
Originally posted by O 16581 72452 5
They're only 16 x 7, i'm not sure the offset, but i'm guessing it's a +35.



Probably not what you're looking for, but there's a picture. You have a PM by the way.
Nah if I get wheels they are gonna be W I D E lol
Reply
Old Sep 16, 2003 | 10:01 PM
  #25  
1984rx7roqet's Avatar
Professional Pornographer
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 131
Likes: 0
From: Illinois
How much for the engine?
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:16 PM.