i got my rx to start last night!!! now it wont start!!
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Pensacola FLA
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
i got my rx to start last night!!! now it wont start!!
it has a rebuilt carb and new o-rings;i pulled off cats and rest of the exhaust it wont start all it does it turn over and jump to start but it wont start!!!! i put a couple gallons of gas in there but it wont go!!!
also i removed rats nest and put on the block off plate and there is an oil and gas mix leaking out and alot leaking out the exhaust manifold!!!
any idea???
also i removed rats nest and put on the block off plate and there is an oil and gas mix leaking out and alot leaking out the exhaust manifold!!!
any idea???
#4
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Pensacola FLA
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
then ill need a new intake gasket!!! right?
should i put gasket sealent on the o-rings???
anyone have other ideas??
i will be getting new plugs and plug wires soon!!!!
should i put gasket sealent on the o-rings???
anyone have other ideas??
i will be getting new plugs and plug wires soon!!!!
#5
Banned. I got OWNED!!!
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
hell, just might be flooded. check for spark and make sure your getting fuel to the carb. if so, then push start it. i had the same prob after mine sat for a month with atf in it. just got a friend to push my car with his car while i left it in second gear and the key to the on position. pumped the gas and BAM. she fired up has hasnt had a prob since!!!! (knock on wood)
Thread
Thread Starter
Forum
Replies
Last Post