how to find tdc??? URGENT!
05-16-05, 10:59 PM
#1
boost my 7
Thread Starter
Join Date: Jun 2004
Location: Colfax, Washington
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
how to find tdc??? URGENT!
i need to know how to find TDC on my 12a...my pulley probably isnt in the right place since i rebuild my engine...also...how do i line up the dizzy? there are 3 dots on it and then a large line...which dot do i line up the line with?
05-16-05, 11:27 PM
#2
Take a look at this. Wacky shows a couple ways to make sure the pulley is on correct.
https://www.rx7club.com/showthread.p...3&page=2&pp=15
With the dizzy, line the line on the shaft with the dimple on the gear. There are two holes that go straight though (180* apart). The alignment dimple is the other mark.
https://www.rx7club.com/showthread.p...3&page=2&pp=15
With the dizzy, line the line on the shaft with the dimple on the gear. There are two holes that go straight though (180* apart). The alignment dimple is the other mark.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
