hood scoop
12-25-02, 06:38 PM
#1
Full Member
Thread Starter
Join Date: Aug 2002
Location: bethlehem, Pa
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
hood scoop
i'm think of gettin a hood scoop wit a 100bux i got for jcwhitney. i wan the one that actually functions, not just for looks, but my question is has anyone rigged up a """ram air""" sytem type thing wit a hood scoop for a carbed rx7?
12-26-02, 12:50 PM
#5
Tennis, anyone
The only problem with a ' hood scoop ' ,,one that raises
above the hood line is,,what about water ?? and other crap,, an air box with a water trap is needed, or created.
on my other hood i cut and 'glassed in a NACA duct. since then i've replaced the hood with another hood untill i fab an air box with a water trap.
above the hood line is,,what about water ?? and other crap,, an air box with a water trap is needed, or created.
on my other hood i cut and 'glassed in a NACA duct. since then i've replaced the hood with another hood untill i fab an air box with a water trap.
Trending Topics
12-26-02, 03:41 PM
#8
Tennis, anyone
If your talking about the picture of the red 7, thats called a NACA duct, it's really a vent in-let, no scoop, flush with the hood line, or any line for that matter.
12-26-02, 03:56 PM
#9
Rotary Freak
Originally posted by mark perez
The only problem with a ' hood scoop ' ,,one that raises
above the hood line is,,what about water ?? and other crap,, an air box with a water trap is needed, or created.
on my other hood i cut and 'glassed in a NACA duct. since then i've replaced the hood with another hood untill i fab an air box with a water trap.
The only problem with a ' hood scoop ' ,,one that raises
above the hood line is,,what about water ?? and other crap,, an air box with a water trap is needed, or created.
on my other hood i cut and 'glassed in a NACA duct. since then i've replaced the hood with another hood untill i fab an air box with a water trap.
plus it was a k&n filter and wouldnt get ruined when wet.
12-27-02, 10:35 AM
#11
MY NEW NAME IS ROTARY 7S
Join Date: Jun 2002
Location: Cell Block 4 (LOCKDOWN)
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Alot of guys who drag race rotarys here in FL use the Nissan 300z Turbo hood scoop that sits on the left side of the car,I have seen it on alot of FB,Datsuns,Toyotas or what ever the put a rotary in..
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM