holley 600 problem
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Mar 2009
Location: Louisville KY
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
holley 600 problem
Alright i just started not getting any fuel out of the secondaries. When i go to change the float bowel level with the screw on top of the nut. Gas gushes out at maybe 1/4 turn of the screw. But with the sight plug out there is no fuel at all coming out. Not a trickle or anything. I tried adjusting it but it doesnt seem to help at all and the gas is a little bit of a danger as well
#4
Moderator
iTrader: (2)
ur supposed to make adjustments with the switch off(pump not running). why do u think there's gaskets there? if the needle is sticking, a slight tap on that adjuster(that's where the needle is) it should free up with fuel pressure behind it. but yeah it wouldn't hurt to go thru it.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM