holley 600 problem
 

Alright i just started not getting any fuel out of the secondaries. When i go to change the float bowel level with the screw on top of the nut. Gas gushes out at maybe 1/4 turn of the screw. But with the sight plug out there is no fuel at all coming out. Not a trickle or anything. I tried adjusting it but it doesnt seem to help at all and the gas is a little bit of a danger as well

check the inlet needle it may be stuck in the closed position

alright i think im going to just go ahead and rebuild it. Im sure it couldnt hurt and for 20 bucks it will probably be worth it. Thank you

ur supposed to make adjustments with the switch off(pump not running). why do u think there's gaskets there? if the needle is sticking, a slight tap on that adjuster(that's where the needle is) it should free up with fuel pressure behind it. but yeah it wouldn't hurt to go thru it.