1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

help wont start

Thread Tools
 
Search this Thread
 
Old Sep 5, 2008 | 10:06 PM
  #1  
JnE-Rx7's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 17
Likes: 0
From: paradise
help wont start

so the story goes i did an auto. to man. swap and i hook th pedels up the trns. and the starter but when i go to turn the key..nothing not even the starter clicks. when i when to check power to the starter it said that it was gettin any power. so will someone help. im stuck driving a piston powered car. i want my rotary back
Reply
Old Sep 8, 2008 | 01:00 PM
  #2  
tvr's Avatar
tvr
Junior Member
Tenured Member 05 Years
 
Joined: May 2005
Posts: 35
Likes: 0
From: Enon, Ohio
I'm not real clear on what you're saying, but check ALL of your connections. I just fixed a slow-crank problem by cleaning my negative connections. Cranks much better and faster now.

Stan
Reply
Old Sep 8, 2008 | 03:16 PM
  #3  
Percentage's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (7)
 
Joined: Jan 2008
Posts: 440
Likes: 1
From: Clarksville, TN
Make sure your connections are correct on your starter. I had this issue too because I didn't check my connection immediately on the starter.
Reply
Old Sep 8, 2008 | 05:26 PM
  #4  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
Is there a starter lockout on the auto shifter, on the 85's?
Reply
Old Sep 9, 2008 | 05:36 AM
  #5  
74RX4's Avatar
Round and Round
Tenured Member 15 Years
iTrader: (10)
 
Joined: Aug 2002
Posts: 1,516
Likes: 3
From: SW Florida
Auto transmissions have an inhibitor switch. There were two wires going to the front, top of the auto transmission. I believe they are Black/yellow and Black/white. Connect these together, starter should get power.
Reply
Old Sep 9, 2008 | 11:17 AM
  #6  
Percentage's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (7)
 
Joined: Jan 2008
Posts: 440
Likes: 1
From: Clarksville, TN
Bingo.

I was about to go look that up.
Reply
Old Sep 9, 2008 | 12:13 PM
  #7  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
That'd be the "start lockout" I was mumbling about. Makes sure the car is out of gear before starting.
Reply
Old Sep 14, 2008 | 06:02 PM
  #8  
JnE-Rx7's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 17
Likes: 0
From: paradise
well i hooked those two wires together and still nothing
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM




All times are GMT -5. The time now is 06:35 PM.