HELP! intake manifold question for you SE owners.
#1
Boosted Fb
Thread Starter
iTrader: (1)
Join Date: Nov 2003
Location: Lost!
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
HELP! intake manifold question for you SE owners.
I'm using the SE lower manifold with my car set up. I was wondering if you can help me identify the nipple(1/4in I think) fitting on the top mid section on the lower manifold(right next to the block). I have no clue whats it for so I just capped. Doe is have vacuum?
Thanks, Ed
Thanks, Ed
#3
I'm using the SE lower manifold with my car set up
If its a fitting for a hose on the top middle part of the lower intake manifold then yes it has vacuum.. for the air bleed sockets within the center housing.
#4
EliteHardcoreCannuckSquad
Join Date: May 2001
Location: Acton, Ontario, Canada
Posts: 4,126
Likes: 0
Received 4 Likes
on
4 Posts
Are you talking about the one under the oil injectors?
That's the connection for the Cold Start Assist System.
I just removed mine. Just cap it off and don't worry about it.
That's the connection for the Cold Start Assist System.
I just removed mine. Just cap it off and don't worry about it.
#5
Boosted Fb
Thread Starter
iTrader: (1)
Join Date: Nov 2003
Location: Lost!
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Racerx7, I meant to type my carb set up. Anyways its a dellorto with RB upper. I wanted to know if that nipple(in front tucked between manifold and block) had vacuum so I can use it for the CCV install.
Thanks, Ed
Thanks, Ed
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM