Help with carb rebuild
10-07-20, 08:52 PM
#1
Junior Member
Thread Starter
Help with carb rebuild
Being my first project car I made a mistake.. lol
I didn’t take a picture of a shaft that I took a bunch of parts off of and now I don’t know why order they go back on. I’ll post pics below but if anybody can help let me know!
And if I put the stuff an the shaft to the right on wrong please let me know! Lol
I didn’t take a picture of a shaft that I took a bunch of parts off of and now I don’t know why order they go back on. I’ll post pics below but if anybody can help let me know!
And if I put the stuff an the shaft to the right on wrong please let me know! Lol
10-07-20, 09:44 PM
#2
Here is a carburetor manual, it's now your new bestfriend. The linkage is the same for all years, from what I can tell
http://foxed.ca/rx7manual/manuals/ma...01979-1985.pdf
These are links to pictures from glazed ham, they helped me out a lot, although he as a simplified setup in the pics
https://www.rx7club.com/attachments/...n-dscn1446.jpg
https://www.rx7club.com/attachments/...n-dscn1440.jpg
http://foxed.ca/rx7manual/manuals/ma...01979-1985.pdf
These are links to pictures from glazed ham, they helped me out a lot, although he as a simplified setup in the pics
https://www.rx7club.com/attachments/...n-dscn1446.jpg
https://www.rx7club.com/attachments/...n-dscn1440.jpg
10-07-20, 09:52 PM
#3
Junior Member
Thread Starter
You are amazing!!!!
Here is a carburetor manual, it's now your new bestfriend. The linkage is the same for all years, from what I can tell
http://foxed.ca/rx7manual/manuals/ma...01979-1985.pdf
These are links to pictures from glazed ham, they helped me out a lot, although he as a simplified setup in the pics
https://www.rx7club.com/attachments/...n-dscn1446.jpg
https://www.rx7club.com/attachments/...n-dscn1440.jpg
http://foxed.ca/rx7manual/manuals/ma...01979-1985.pdf
These are links to pictures from glazed ham, they helped me out a lot, although he as a simplified setup in the pics
https://www.rx7club.com/attachments/...n-dscn1446.jpg
https://www.rx7club.com/attachments/...n-dscn1440.jpg
Thank you! Honestly I went into the project like I knew everything and I then soon realized I know NOTHING.. lol
Thread
Thread Starter
Forum
Replies
Last Post