help: booster venturi
#1
Frankencar
Thread Starter
Join Date: Jan 2004
Location: Michigan
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
help: booster venturi
hey guys we have a streetported engine and a PB&J carb. Well we finally got to tuning it and well we discovered the booster venturi on the rear primary was broken off flush with the top of the carb...if you know what i mean. That would explain our extremely large fuel jets we were needing to run. Ok so since thats out of the way anyone have any ideas on how to Either A fix it or to B get the damn stub out of the carb body. Does fuel actually come out of the booster venturi or does it ony affect the functioning of the airbleeds? If no fuel flows anywhere in the boosterventuri assembly couldn't we just JB weld, or pick your epoxy, the assembly back together so long as we don't get anything on the emulsion tubes?? Any help or knowledge would be cool.
Thanks,
Ron
Thanks,
Ron
#4
Frankencar
Thread Starter
Join Date: Jan 2004
Location: Michigan
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Sterling I had been and he said he would fix it and such i was just trying to look for a quick fix, not trying to **** you guys off. But after more talking with him pretty much nothing to do cept send it back for the fix.
I must say your guy's tech support is fricking sweet, loving working with you guys.
I must say your guy's tech support is fricking sweet, loving working with you guys.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Wicked93gs
2nd Generation Specific (1986-1992)
42
10-07-15 11:58 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM