Header Pannel...
03-01-03, 12:41 PM
#1
Looking for Another RX7
Thread Starter
Join Date: Jan 2002
Location: West Bloomfield MI
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Header Pannel...
Ok guys I'm working on my ITA 83' LE and I have the hood off, and am now trying to get the rest of the front end off. (bumper, header pannel ect.) Anyways on the header pannel I have the bolts off that you see from under the hood. And the last owner bondoed the little gaps on the sides of the header pannel so I'm having to cut the bondo out. Anyways what other bolts have to come off to get this pannel off? And whats the easiest way of dissasembling the body work on the front of the car?
03-01-03, 01:14 PM
#2
'Last Minute' Rallying
Join Date: May 2002
Location: Lincoln, England
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
two bolts either side bolt to the wings and then 2 down each side of the chassis rail
the easiet way is to remove the bumper first , thats just two bolts on the chassis rail and 4 along the bottom of the air dam
the easiet way is to remove the bumper first , thats just two bolts on the chassis rail and 4 along the bottom of the air dam
Thread
Thread Starter
Forum
Replies
Last Post