i was podering and i really havent heard it on this site but i know that everything has been tried b4, so here it goes is it posable to fit the FI system and UIM from a SE on to the 12A LIM and what all could be involved? if i remember correctly the UIM for a sidedraft carb can fit on both the 12A and 13B LIM (correct me if im wrong) if this is the case what all do you guys think i would need?

some of you guys are most likely be think why the heck would you do this? well its bc im weird and different!

 

You will need an adapter plate and some port matching. Iirc, all of the 1 piece 2 barrel wrap around style intakes were made for the 12A, there is an adapter plate that is needed to mount it to a 13B. I don't know if the were for the 4 or 6-port engines, I believe they were for the 4-ports.

You will need the SE center iron for the injectors, or have the intake modified for injector bungs.

 

It's been done. Tom Ellam used to have it on his CSP winning RX-3 then went with an S5 intake.

I don't remember how, it was about 10 years ago.

 

if i used the S5 intake could it be done with out sawping the center plates?

edit: also if i go with the S5 i could also use the CAS too?