GSL-SE specs`
GSL-SE specs`
OK me and my friend have been fighting forever about this... i think i have two injectors... he says i have 4... which is it? and can you please give me a site thats reliable to shove in his face .... lol thank you!
Cory
Cory
Trending Topics
Originally Posted by hornbm
the high power renesis uses 6 injectors
Now what about the renesis? Where did you hear 6 injectors?
EDIT: Sure does have 6 injectors for the high output version. Here's the FSM
http://www.mymazdarotary.com/rx-8_onlinemanual/
Last edited by Rex4Life; Jan 2, 2005 at 09:57 PM.
the six injectors on the renesis have 3 stages: 1-2 used for low rpms, 2-the two used for low rpms and another 2 for the midrange which gives you 4 , 3-stage 1&2 plus 2 more for high rpms above 6.5k all the way to its 9k redline before the 9,500 fuel cut-off for a total of 6 injectors. that is, for those who bought the manual tranny, the auto has a 8k fuel cut
(Edit)...sorry...i posted just after your edit
(Edit)...sorry...i posted just after your edit
Originally Posted by Brianhsval
What's up with the renesis comment? Has no bearing on the question at all. Like they said SE has 2.
Originally Posted by steve84GS TII
84-85 GSL-SE has 2 680cc low impedence injectors in the center plate.........period.
Staged, 4 injector EFI was used on all 86-up rotaries, and is still used.
Staged, 4 injector EFI was used on all 86-up rotaries, and is still used.
Last edited by hornbm; Jan 2, 2005 at 10:46 PM.
I wasnt aware of the high output Renesis' 6 injector setup.Thanks for the info.
I was reffering to the REW engines which were made up until recently,all of which use 4 injectors.(except of course the 20B,but its still 2 per rotor!)
I was reffering to the REW engines which were made up until recently,all of which use 4 injectors.(except of course the 20B,but its still 2 per rotor!)
Originally Posted by Dom
Originally Posted by Gregs
i only found 2 when dismantling my se parts car, lol (that was not meant to be taken seriously) 

Right, I was not trying to offend, but just agreeing with what you said.




